Compute and analyze biodiversity metrics with PAMPA toolsuite

Overview
Creative Commons License: CC-BY Questions:
  • How to evaluate properly populations and communities biological state with abundance data?

  • How does trawl exploited populations of Baltic sea, Southern Atlantic and Scotland are doing over time?

  • How to compute and analyze biodiversity metrics from abundance data?

Objectives:
  • Upload data from DATRAS portal of ICES

  • Pre-process population data with Galaxy

  • Learning how to use an ecological analysis workflow from raw data to graphical representations

  • Learning how to construct a Generalized Linear (Mixed) Model from a usual ecological question

  • Learning how to interpret a Generalized Linear (Mixed) Model

Requirements:
Time estimation: 2 hours
Supporting Materials:
Published: Nov 19, 2020
Last modification: Feb 20, 2024
License: Tutorial Content is licensed under Creative Commons Attribution 4.0 International License. The GTN Framework is licensed under MIT
purl PURL: https://gxy.io/GTN:T00125
rating Rating: 5.0 (0 recent ratings, 2 all time)
version Revision: 49

This tutorial aims to present the PAMPA Galaxy workflow, how to use it to compute common biodiversity metrics from species abundance data and analyse it through generalized linear (mixed) models (GLM and GLMM). This workflow made up of 5 tools will allow you to process temporal series data that include at least year, location and species sampled along with abundance value and, finally, generate article-ready data products.

The PAMPA workflow is an ecological analysis workflow, like so, it is divided as to do a Community analysis and a Population analysis separately in accordance with the biodiversity level described. Only the last tool to create a plot from your GLM results is common to the two parts of this workflow. Thus, in this tutorial, we’ll start by the Community analysis followed by the Population analysis.

Population: group of individuals of the same species interacting with each other.

Community: group of several species interacting with each other.

PAMPA toolsuite workflow. Open image in new tab

Figure 1: PAMPA toolsuite workflow

Each part of this workflow has the same elementary steps :

  • A first tool to compute metrics:
    • Community metrics ( Calculate community metrics ( Galaxy version 0.0.2)): Total abundance, Species richness, Shannon index, Simpson index, Hill index and Pielou index
    • Population metrics ( Calculate presence absence table ( Galaxy version 0.0.2)): Abundance, Presence-absence
  • A second tool to compute Generalized Linear (Mixed) Models, testing the effect of 'site', 'year' and/or 'habitat' on a metric selected by the user:
    • Community analysis ( Compute GLM on community data ( Galaxy version 0.0.2)): The GLM(M) is computed on the whole dataset and, if a separation factor is selected by the user, GLM(M)s are computed on subsets of the dataset (example: one GLM(M) per ecoregion)
    • Population analysis ( Compute GLM on population data ( Galaxy version 0.0.2)): One GLM(M) is computed on each species separately
  • A third tool common for Community and Population analyses with at least 'year' as a fixed effect to create time-series plots from your GLM(M) results ( Create a plot from GLM data ( Galaxy version 0.0.2)). Two plots will be created for each GLM(M): one from the “Estimate” values of the GLM(M) and one from raw values from metrics file.

Generalized Linear Models (GLMs) and Generalized Linear Mixed Models (GLMMs) are two extensions of Linear Models (LMs). As LMs uses only Gaussian distribution (for continuous variables), GLMs permits to analyse a wide spectrum of data with various probability distributions (including Poisson distribution for count data and binomial distribution for presence-absence data). To go further, GLMMs permits to handle pseudo-replication generated by non-independant repeated observations by defining one or more random effect in your model. Here, GLM(M) tools allows you to define 'year' and/or 'site' as random effects to take account of temporal and/or spatial replicas. The other effects taken into account in the model that aren’t random are defined as ‘fixed’.

In this tutorial, we’ll be working on data extracted from the data portal DATRAS (Database of Trawls Surveys) of the International Council for the Exploration of the Sea (ICES). After pre-processing to fit the input format of the tools, we’ll see how to calculate biodiversity metrics and construct properly, easily and with good practice, several GLMMs to test the effect of 'year' and 'site' on the species richness of each survey studied and on the abundance of each species.

Agenda

In this tutorial, we will cover:

  1. Upload and pre-processing of the data
    1. Data upload
    2. Prepare the data
  2. Compute Community and Population metrics
    1. Creation of the observation unit file
  3. GLMMs and plots on Community and Population metrics
    1. Compute GLMMs and create plots on Community metrics
    2. Compute GLMMs and create plots on Population metrics
  4. Conclusion

Upload and pre-processing of the data

This first step consist of downloading and properly prepare the data to use it in PAMPA toolsuite.

Data upload

Hands-on: Data upload
  1. Create a new history for this tutorial and give it a name (example: “DATRAS data analysis through PAMPA workflow”) for you to find it again later if needed.

    Click the new-history icon at the top of the history panel:

    UI for creating new history

    1. Click on galaxy-pencil (Edit) next to the history name (which by default is “Unnamed history”)
    2. Type the new name
    3. Click on Save

    If you do not have the galaxy-pencil (Edit) next to the history name:

    1. Click on Unnamed history (or the current name of the history) (Click to rename history) at the top of your history panel
    2. Type the new name
    3. Press Enter

  2. Import the CSV files from Zenodo via link with the three following links
    https://zenodo.org/record/4264936/files/CPUE%20per%20length%20per%20area_A.csv?download=1
    https://zenodo.org/record/4264936/files/CPUE%20per%20length%20per%20area_B.csv?download=1
    https://zenodo.org/record/4264936/files/CPUE%20per%20length%20per%20area_C.csv?download=1
    
    • Copy the link location
    • Click galaxy-upload Upload Data at the top of the tool panel

    • Select galaxy-wf-edit Paste/Fetch Data
    • Paste the link(s) into the text field

    • Press Start

    • Close the window

    You may as well use the shared data library or directly download the data from the DATRAS data portal but the previous method is preferred.

    As an alternative to uploading the data from a URL or your computer, the files may also have been made available from a shared data library:

    1. Go into Shared data (top panel) then Data libraries
    2. Navigate to the correct folder as indicated by your instructor.
      • On most Galaxies tutorial data will be provided in a folder named GTN - Material –> Topic Name -> Tutorial Name.
    3. Select the desired files
    4. Click on Add to History galaxy-dropdown near the top and select as Datasets from the dropdown menu
    5. In the pop-up window, choose

      • “Select history”: the history you want to import the data to (or create a new one)
    6. Click on Import

    The files used for this tutorial have been imported from DATRAS data portal in October 2020. Those files are often updated on the data portal. So if you choose to download files directly from DATRAS there may be some differences with the files on Zenodo and the final results of this tutorial.

    • Go to link: https://datras.ices.dk/Data_products/Download/Download_Data_public.aspx
    • In the field ‘Data products’ choose ‘CPUE per length per area’
    • In the field ‘Survey’ choose the survey of interest. Here, we chose to use ‘EVHOE’, ‘BITS’ and ‘SWC-IBTS’ surveys but you can’t select the three surveys at once in this field. So, you’ll have to select one survey at a time (‘EVHOE’, ‘BITS’ and ‘SWC-IBTS’) and then repeat the six following steps for each of the three surveys.
    • In the field ‘Quarter(s)’ we chose to tick ‘All’
    • In the field ‘Year(s)’ we chose to tick ‘All’
    • In the field ‘Area(s)’ we chose to tick ‘All’
    • In the field ‘Species’ we chose to tick ‘Standard species’ and ‘All’
    • Click on ‘Submit’
    • Tick ‘I accept the documents and their associated restrictions and agree to acknowledge the data source’
    • Open the Galaxy Upload Manager (galaxy-upload on the top-right of the tool panel)
    • Drop files on the dedicated area or click ‘Choose local files’
    • Click on ‘Start’
    • Click on ‘Close’ to return to Galaxy tools interface
  3. Make sure that each datasets has the following header "Survey","Year","Quarter","Area","AphiaID", "Species","LngtClass","CPUE_number_per_hour" and that separator are “,”

  4. In order to avoid mixing up the data files, we’ll add a tag to each file:
    • tag #EVHOE to the tabular data file of the EVHOE survey : “CPUE per length per area_A.csv”
    • tag #SWCIBTS to the tabular data file of the SWC-IBTS survey : “CPUE per length per area_B.csv”
    • tag #BITS to the tabular data file of the BITS survey : “CPUE per length per area_C.csv”
    1. Click on the dataset to expand it
    2. Click on Add Tags galaxy-tags
    3. Add a tag starting with #
      • Tags starting with # will be automatically propagated to the outputs of tools using this dataset.
    4. Press Enter
    5. Check that the tag appears below the dataset name

    If tags doesn’t display directly on your history, refresh the page.

  5. Convert datatype CSV to tabular for each data file

    • Click on the galaxy-pencil pencil icon for the dataset to edit its attributes
    • In the central panel, click on the galaxy-gear Convert tab on the top
    • In the upper part galaxy-gear Convert, select Convert CSV to tabular
    • Click the Create dataset button to start the conversion.

These three data files gather Catch Per Unit Effort (CPUE) observations, a relative abundance measure mostly used to assess exploited fish species populations :

Prepare the data

Before starting the preparation of the data, we need to identify which inputs we need for the tools and their format (same for Community or Population analyses except for a few details):

  • Input for the tools to compute metrics: Observation data file containing at least 'year' and “location” sampled that might be represented in one field “observation.unit”, “species.code” to name the species sampled, and 'number' as the abundance value
  • Supplementary input for the tools to compute a GLM(M) analysis: Observation unit data file containing at least “observation.unit” and 'year'. It might also contain 'habitat', 'site' and any other information about the location at a given 'year' that seems useful (examples: “temperature”, “substrate type”, “plant cover”)

The ‘observation.unit’ field is a primary key linking the observation data file and the metrics data file to an observation unit data file. An unique ‘observation.unit’ identifier represents an unique sampling event at a given year and location. Such a file permits to reduce the size of data files, if all informations about the sampling event (examples: “temperature”,”substrate type”,”plant cover”) are gathered in the same dataframe as the observations data (“species sampled”,”count”) same informations will be unnecessarily repeated in many lines.

For this workflow, two nomenclatures are advised :

  • The PAMPA file nomenclature: [Two first letters of 'site'][Two last numbers of 'year'][Identifier of the precise sampled location in four numbers]

    The fields 'year' and “location” will be automatically infered from this nomenclature in the first tools to compute metrics

  • The automatic nomenclature: ['year' in four numbers]_[Identifier of the precise sampled location in any character chain]

    This nomenclature will be automatically constructed in the first tools to compute metrics if the input file doesn’t already have a “observation.unit” field but only 'year' and “location”

If you already have your own nomenclature for the primary key linking your files, it will remain untouched by the tools but the output data table from the first tools to compute metrics won’t contain 'year' and “location” fields. In this case and if you want to add such informations to your metrics data file, you can use the tool Join ( Galaxy version 1.1.2) with the metrics data file and the observation unit data file.

Those two fields both inform a geographical indication.

“location” is the finest geographical level and 'site' may represent a wider geographical range but can also represent the same geographical level as “location”. This choice is up to your discretion, depending which geographical level you want to take into account in your statistical analysis.

Concatenation of data files

Hands-on: Data files concatenation
  1. Concatenate datasets tail-to-head (cat) ( Galaxy version 0.1.0) select the three #BITS, #EVHOE and #SWCIBTS datasets in param-files “Datasets to concatenate”

    1. Click on param-files Multiple datasets
    2. Select several files by keeping the Ctrl (or COMMAND) key pressed and clicking on the files of interest

  2. Suppress the #BITS, #EVHOE and #SWCIBTS tags and add the #Concatenate tag to the Concatenated data file

    1. Click on the dataset to expand it
    2. Click on Add Tags galaxy-tags
    3. Add a tag starting with #
      • Tags starting with # will be automatically propagated to the outputs of tools using this dataset.
    4. Press Enter
    5. Check that the tag appears below the dataset name

  3. Verify if the three header lines have been included in the concatenate with Count occurrences of each record and following parameters :
    • param-file “from dataset”: #Concatenate Concatenated data file
    • param-select “Count occurrences of values in column(s)”: Column: 1
    • param-select “Delimited by”: Tab
    • param-select “How should the results be sorted?”: With the rarest value first so multiple occurences can be seen directly at first lines of the resulting file
  4. If the value Survey has more than 1 occurrence use Filter data on any column using simple expressions with following parameters :
    • param-file “Filter”: #Concatenate Concatenated data file
    • param-text “With following condition”: c1!='Survey'
    • param-text “Number of header lines to skip”: 1
    Question

    How many header line(s) is left?

    Use Count occurrences of each record and following parameters :

    • param-file “from dataset”: #Concatenate Filtered data file
    • param-select “Count occurrences of values in column(s)”: Column: 1
    • param-select “Delimited by”: Tab
    • param-select “How should the results be sorted?”: With the rarest value first

    Tip: Hit the rerun button galaxy-refresh on the output of the previous run of Count occurrences of each record, and change the input dataset.

    One header line is left as the value Survey has only 1 occurrence in the first column.

Formating of data files

Here we have data from the three surveys in one datatable (Filtered data file) with the following fields "Survey", "Year","Quarter","Area", "AphiaID","Species","LngtClass","CPUE_number_per_hour". We now need to define the proper columns needed for the PAMPA workflow considering there is no primary key close to “observation.unit” :

  • “location” from “Area” associated with “Survey” to avoid mixing up areas from different surveys
  • 'year' from “Year”
  • “species.code” from “Species”
  • 'number' from “CPUE_number_per_hour”

This #Concatenate Filtered data file containing the three surveys will be used to create the observation unit data file and compute Community metrics as the Community analysis can be automatically processed on each survey separately. However, this file can’t be used as it is to compute Population metrics as it may contain data for several populations of the same species that do not interact with each other. Therefore, we have to work on the three #BITS, #EVHOE and #SWCIBTS original tabular files for the Population analysis.

Hence, the following manipulations will be applied not only on #Concatenate Filtered data file but also on the three #BITS, #EVHOE and #SWCIBTS original tabular files used for the concatenation.

Hands-on: Create the "location" field
  1. Column Regex Find And Replace ( Galaxy version 1.0.0) with following parameters:
    • param-files “Select cells from”: #Concatenate Filtered data file + three #BITS, #EVHOE and #SWCIBTS tabular data files
    • param-select “using column”: Column: 1
    • param-repeat Click ”+ Insert Check”:
      • param-text “Find Regex”: ([A-Z]{3}[A-Z]+)
      • param-text “Replacement”: \1-
    1. Click on param-files Multiple datasets
    2. Select several files by keeping the Ctrl (or COMMAND) key pressed and clicking on the files of interest

    Question

    What did we do with this tool?

    We searched for every character chain matching the extended regular expression (Regex) ([A-Z]{3}[A-Z]+) in the first column “Survey” meaning every character chain of 4 or more capital letters. With the replacement \1- we indicated to add - after the bracketed character chain. This manipulation is made in order to merge properly columns “Area” and “Survey” with a separation.

  2. Merge Columns ( Galaxy version 1.0.2) with following parameters :
    • param-files “Select data”: four #Concatenate, #BITS, #EVHOE and #SWCIBTS Column Regex Find And Replace data files
    • param-select “Merge column”: Column: 1
    • param-select “with column”: Column: 4

    Check if the output data files has a supplementary column called “SurveyArea” and values with the survey ID and area ID separated with -.

Hands-on: Change column names

Regex Find And Replace ( Galaxy version 1.0.0) with following parameters :

  • param-files “Select lines from”: four #Concatenate, #BITS, #EVHOE and #SWCIBTS Merged data files
  • param-repeat Click ”+ Insert Check”:
    • param-text “Find Regex”: Year
    • param-text “Replacement”: year
  • param-repeat Click ”+ Insert Check”:
    • param-text “Find Regex”: Species
    • param-text “Replacement”: species.code
  • param-repeat Click ”+ Insert Check”:
    • param-text “Find Regex”: CPUE_number_per_hour
    • param-text “Replacement”: number
  • param-repeat Click ”+ Insert Check”:
    • param-text “Find Regex”: SurveyArea
    • param-text “Replacement”: location

Check if the columns are corresponding to "Survey","year","Quarter","Area","AphiaID","species.code","LngtClass", "number","location" (pay attention to case).

Add input name as column ; Compute an expression on every row ; Table Compute ; Join two files on column allowing a small difference ; Join two files ; Filter Tabular ; melt ; Unfold columns from a table ; Remove columns by heading ; Cut columns from a table ; Filter data on any column using simple expressions ; Transpose rows/columns in a tabular file ; …

Compute Community and Population metrics

In this part of the tutorial, we’re starting to use tools from the PAMPA toolsuite to compute Community and Population metrics. Then, we’ll be creating the observation unit file.

Hands-on: Compute Community metrics
  1. Calculate community metrics ( Galaxy version 0.0.2) with following parameters:
    • param-file “Input file”: #Concatenate Regex Find And Replace data file
    • param-select “Choose the community metrics you want to compute”: All

    Check if the output Community metrics data file has the following column names "year","location","number", "species_richness","simpson","simpson_l","shannon","pielou","hill","observation.unit".

  2. Tag the output Community metrics with #Community
Hands-on: Compute Population metrics

Calculate presence absence table ( Galaxy version 0.0.2) with param-files “Input file”: #EVHOE, #BITS and #SWCIBTS Regex Find And Replace data files

Check if the outputs Population metrics data files has the following column names "year","location", "species.code","number","presence_absence","observation.unit".

Creation of the observation unit file

Now that we have the “observation.unit” fields automatically created in the Community and Population metrics files we can create the observation unit file from the #Concatenate Regex Find And Replace data file with the same nomenclature for the “observation.unit” fields, namely:

['year' in four numbers]_[Identifier of the precise sampled location in any character chain]

Hands-on: Create the observation unit file
  1. Column Regex Find And Replace ( Galaxy version 1.0.0) with following parameters:
    • param-files “Select cells from”: #Concatenate Regex Find And Replace data file
    • param-select “using column”: Column: 2
    • param-repeat Click ”+ Insert Check”:
      • param-text “Find Regex”: ([0-9]{4})
      • param-text “Replacement”: \1_
  2. Merge Columns ( Galaxy version 1.0.2) with following parameters :
    • param-files “Select data”: #Concatenate Column Regex Find And Replace data file
    • param-select “Merge column”: Column: 2
    • param-select “with column”: Column: 9

    Check if the output data file has a supplementary column called “yearlocation” and values with the 'year' and “location” ID separated with _.

  3. Column Regex Find And Replace ( Galaxy version 1.0.0) with following parameters:
    • param-files “Select cells from”: #Concatenate Merge Columns data file
    • param-select “using column”: Column: 2
    • param-repeat Click ”+ Insert Check”:
      • param-text “Find Regex”: ([0-9]{4})_
      • param-text “Replacement”: \1
    Question

    What did we do with this tool?

    We removed the _ we added in the first part of this “Hands_on” from the values of the second column 'year' to get proper numeric values back.

  4. Cut columns from a table (cut) ( Galaxy version 1.1.0) with following parameters :
    • param-files “File to cut”: #Concatenate Column Regex Find And Replace data file
    • param-select “Operation”: Keep
    • param-select “Delimited by”: Tab
    • param-select “Cut by”: fields
      • param-select “List of Fields”: Column: 1 Column: 2 Column: 3 Column: 4 Column: 9 Column: 10

    Check if the output #Concatenate Advanced Cut data file has the following column names "Survey","year","Quarter", "Area","location","yearlocation".

  5. Sort data in ascending or descending order ( Galaxy version 1.1.1) with following parameters :
    • param-files “Sort Query”: #Concatenate Advanced Cut data file
    • param-text “Number of header lines”: 1
    • “1: Column selections”
      • param-select “on column”: Column: 6
      • param-check “in”: Ascending order
      • param-check “Flavor”: Alphabetical sort
    • param-select “Output unique values”: Yes
    • param-select “Ignore case”: No

    The output #Concatenate Sort data file must have fewer lines than the #Concatenate Advanced Cut data file.

  6. Regex Find And Replace ( Galaxy version 1.0.0) with following parameters :
    • param-files “Select lines from”: #Concatenate Sort data file
    • param-repeat Click ”+ Insert Check”:
      • param-text “Find Regex”: yearlocation
      • param-text “Replacement”: observation.unit
    • param-repeat Click ”+ Insert Check”:
      • param-text “Find Regex”: location
      • param-text “Replacement”: site

    Here, we define 'site' represents the same geographical level as “location”.

  7. Tag the output #Concatenate Regex Find And Replace data file with #unitobs

    Check if the output #Concatenate #unitobs data file has the following column names "Survey","year","Quarter", "Area","site","observation.unit".

GLMMs and plots on Community and Population metrics

Now that we have all our input files for GLM(M) tools ready, we can start computing statistical models to make conclusions on our surveys. But before starting to use the Compute GLM on community data ( Galaxy version 0.0.2) and the Compute GLM on population data ( Galaxy version 0.0.2) tools, we have to think about the model we want to compute. The tools allows to test the effects Year', Site and/or Habitat on one interest variable at a time. As we don’t have data about the Habitat we can’t test its effect. It is always better to take a temporal and a geographical variable into account in an ecological model so we’ll test the effect of Year and Site with a random effect of Site to take geographical pseudo-replication into account.

Compute GLMMs and create plots on Community metrics

For the Community analysis we have the choice to test the effect of Year and Site on:

  • “Total abundance”
  • or “Species richness”
  • or “Simpson index”
  • or “1 - Simpson index”
  • or “Shannon index”
  • or “Pielou index”
  • or “Hill index”

As a GLM(M) permits to take into account only one interest variable at a time, we choose to take “Species richness” as the interest variable, namely the quantity of different species at a given time and location. This metric is located on the fourth column of the #Concatenate #Community metrics data file.

However, if you’re interested to test the effects of Year and Site on another metric you may compute the GLM(M) tool again and choose any column of the #Concatenate #Community metrics data file containing one of the metrics cited above.

As said above, analyses will be separated by the field “Survey” (first column) to avoid bias.

Hands-on: Compute GLMM on Community metrics
  1. Compute GLM on community data ( Galaxy version 0.0.2) with following parameters:
    • param-file “Input metrics file”: #Concatenate #Community metrics data file
    • param-file “Unitobs informations file”: #Concatenate #unitobs data file
    • param-select “Interest variable from metrics file”: Column: 4
    • param-select “Separation factor of your analysis from unitobs file”: Column: 1
    • param-select “Response variables”: Year Site
    • param-select “Random effect?”: Site
    • param-select “Specify advanced parameters”: No, use program defaults

The three outputs must have three tags #Concatenate #Community #unitobs and the first one named ‘GLM - results from your community analysis’ must contain five lines. This file is formated to have one line per GLM processed, it has been formated this way to make GLM results easier to represent and modify if needed. However, this format is often not suited to read directly the results on Galaxy as Galaxy handles better tabular files with a lot of lines rather than files with a lot of columns. So, if your file doesn’t display properly on Galaxy as a data table, we advise to do the following optional step.

  1. (optional) Transpose rows/columns in a tabular file ( Galaxy version 1.1.0) with #Concatenate #Community #unitobs ‘GLM - results from your community analysis’ data file

For now, there are two advanced parameters you can setup in the GLM tools:

  • param-select “Distribution for model” permits you to choose a probability distribution for your model. When Auto is selected, the tool will automatically set the distribution on Gaussian, Binomial or Poisson depending on the type of your interest variable but it may exist a better probability distribution to fit your model. Mind that if you choose to use a random effect, “quasi” distribution can’t be used for your model.

  • param-select “GLM object(s) as .Rdata output?” permits you to get .Rdata file of your GLM(M)s if you want to use it in your own R console.

The distribution family for a model is mainly selected by looking at the interest variable of the model:

  • If your interest variable is a continuous numeric variable (weigth, size, mean, …) it follows a Gaussian distribution so you should select Gaussian.
  • If your interest variable is a discrete numeric variable (count) it follows a Poisson distribution so you should select Poisson.
  • If your interest variable is a binary variable (0-1, presence-absence) it follows a Binomial distribution so you should select Binomial.

These three distributions are the most commonly used, the other distributions are used when the interest variable , the data and/or the model has specifics:

  • When the model is over-dispersed, use a Quasi-Poisson (when interest variable is discrete) or a Quasi-Binomial (when interest variable is binary) distribution.
  • If your model doesn’t fit well and your interest variable is a positive continuous variable, you may try with Gamma or Inverse-Gaussian distribution.

Read and interpret raw GLMM outputs

The GLM tool has three outputs:

  • The first output, ‘GLM - results from your community analysis’ data file, contains the summary of each GLMMs on each lines.
  • The second output, ‘Simple statistics on chosen variables’ file, contains descriptive statistics (mean, median, …) of the interest variable for the whole input data table and for each selected factor levels combinations. Here, each Site at each Year.
  • The third output, ‘Your analysis rating file’, contains a notation for all analyses performed and notations for each GLMMs processed. This rate is based on nine criterias commonly used in ecology to estimate wether a Linear Model has been constructed properly or not. At the end of the file, red flags and advices to improve your model are displayed also depending on the same criterias. This file is really useful to look at the bigger picture

For now, there are nine criterias taken into account to rate GLM(M)s in the Galaxy tools:

  • Plan completeness: If part of factor levels combinations are inexistant, bias can be induced. (0.5)
  • Plan balance: If factor levels combinations aren’t present in same quantity, bias can be induced. (0.5)
  • NA proportion: Lines with one or more NA value are ignored in Linear Models. If many NA values, there are less observations taken in account in the model than expected. (1)
  • Residuals dispersion (DHARMa package): If the dispersion of residuals isn’t regular, the model is either under- or over-dispersed. The distribution selected for the model isn’t right. (1.5) To know if it is under- or over-dispersion, compute “deviance”/“df.resid” : if the result is > 1 it is over-dispersion, if the result is < 1 it is under-dispersion.
  • Residuals uniformity (DHARMa package): If the residuals aren’t uniform, the distribution selected for the model isn’t right. (1)
  • Outliers proportion (DHARMa package): If too much outliers, the distribution selected for the model isn’t right or data is biased. (0.5)
  • Zero-inflation (DHARMa package): If too much zeros in data, bias can be induced. (1)
  • Observations / factors ratio: If the number of factors taken into account in the model exceeds 10% of the number of observations (ex: 10 factors for 90 observations), bias can be induced. (1)
  • Number of levels of the random effect: If no random effect in the model or if the factor selected as random effect has less than 10 levels. (1)

First output: ‘GLM - results from your community analysis’

First, on the ‘GLM - results from your community analysis’ data file, we see four analyses: global on the whole dataset and one analysis for each of the three surveys BITS, EVHOE and SWC-IBTS. We also see the Poisson distribution has been automatically selected by the tool. It seems right as the interest variable “Species richness” is a count.

Then, we see five fields that gives indexes to evaluate the quality of a model in comparison to another model performed on the same data, so they can’t be used to compare the four models performed here :

  • “AIC” Akaike information criterion. It is based on the number of factors. The lower AIC is better.
  • “BIC” Bayesian information criterion, is a derivate of AIC. It is based on the number of factors selected and on the sample size. The lower BIC is better.
  • “logLik” log-likelihood, is an index that estimates the likelihood of obtaining the sample of observations used for the model in the selected distribution. The higher logLik is better.
  • “deviance”, evaluates the model’s goodness of fit. The lower deviance is better.
  • “df.resid”, degrees of freedom in residuals used to calculate the adjusted R-square that indicates the fit quality.

Three statistics about the random effect Site are given in this first file: standard deviation, number of observations taken into account in the model and number of levels in the random effect. As Site have been set as a random effect, pseudo-replication caused by the factor Site variable is taken into account to fit the model as well as its effects on the interest variable but it is not tested so we can’t make any conclusion regarding its effects on species richness.

At this point on, elements on fixed effects are displayed :

  • “Estimate” is the mean value of the interest variable estimated by the model for a given factor.
  • “Std.Err” standard error, is the standard deviation of the “Estimate”. It measures uncertainty of the “Estimate”.
  • “Zvalue” (or “Tvalue” depending on the distribution) is the “Estimate” divided by the “Std.Err”.
  • “Pvalue” is the probability that the interest variable is not impacted by a given factor. If this probability is under a certain value (commonly 5% in ecology so a p-value under 0.05), we determine the factor has a significant effect on the interest variable.
  • “IC_up” and “IC_inf” are the upper and lower values of the confidence interval at 95% of the “Estimate”. The confidence interval is the range of values that your “Estimate” may take 95% of the time if you re-sample your data.
  • “signif” significativity, “yes” if the “Pvalue” is inferior to 0.05. Tells you wether the tested factor has a significant effect on your interest variable.

If the factor used as fixed effect is defined as a qualitative variable, those seven fields will be provided for each factor’s level and if it is a continuous variable they will be provided only once for the whole factor.

Here, the factor 'year' may be considered a continuous variable as well as a qualitative variable. Only, it doesn’t provide the same informations :

  • If we consider 'year' as a continuous variable the model will inform on the trend of the interest variable on the whole time-series. Making it more interesting to know about the global behaviour of the interest variable over time.
  • If we consider 'year' as a qualitative variable the model will inform on the relative mean of interest variable for each year individually. Making it more interesting to know about each year individually and plot a detailed curve.

As both these solutions are interesting, the tool is computing two GLMMs when Year is selected as a fixed effect:

  • one GLMM with Year as a continuous variable with results on fields “year Estimate”, “year Std.Err”, “year Zvalue”, “year Pvalue”, “year IC_up”, “year IC_inf” and “year signif”.
  • one GLMM with Year as a qualitative variable in the same fields with each Year’s levels as “YYYY Estimate”, “YYYY Std.Err”, “YYYY Zvalue”, “YYYY Pvalue”, “YYYY IC_up”, “YYYY IC_inf” and “YYYY signif”.

The “(Intercept)” value represents the reference value, it is rarely used for interpretations. We see no significant effect on the ‘global’ model which seems logical as it considers the three surveys that are in three geographical areas so three distinct communities. However, we observe the same thing with models on each of the three surveys separately.

Question

What does this result with no significant effect found mean? How can we explain it?

This result would mean that the communities sampled in this dataset haven’t change in the whole time series. However, this result can’t be really trusted because the interest variable we selected is the species richness and for the need of this tutorial we downloaded only part of the dataset with a limited number of species. Hence, this dataset isn’t really suited to perform a community analysis as only a little part of the community is considered.

Second output: ‘Simple statistics on chosen variables’

The second output file doesn’t tell much about the statistic models, it contains details for you to have an outlook on the interest variable of the input data file containing the community metrics. We can see in the ‘Base statistics’ part that the maximum species richness in the data file is 7 which is very low for trawl surveys and confirms this dataset isn’t suited to perform community analyses.

Third output: ‘Your analysis rating file’

Here, we already pointed out a major issue with the original data file for community analyses and we know they aren’t robust. The third output will help us get a supplementary layer of understanding and take a step back on the quality of the models performed. We see the global rate is 3.5 out of 10 so it seems the analyses aren’t of good quality but we need to see each analysis individually to make real conclusions. The best rate is for the analysis on EVHOE survey 4 out of 8 which is a medium rate, the model isn’t necessarily bad but it can be improved. Indeed, data for this model contains few NA values and it has a complete plan but not balanced. However, two very important criterias aren’t checked: residuals haven’t a regular dispersion and aren’t uniform so it seems Poisson distribution doesn’t fit. Besides, there isn’t enough factor’s levels in 'site' to use it as a random effect. To get a relevant model we should redo the model without Site as a random effect but in order to shorten this tutorial we won’t develop this manipulation here.

You can see in the last part of the file ‘Red flags - advice’, some advices to improve your models but the issues detected in models can come from different reasons (like here, the data isn’t representative enough of the whole community) and may be hard to correct. Hence, you can try with another probability distribution but this issue may come from the fact that the data isn’t suited to make an analysis on species richness. Overall, the four models aren’t really trust-worthy.

Summary

With all this interpretation made from raw results, we still don’t really visualize these results clearly. For this, it could be nice to get a graphical representation of the GLMMs results and the interest variable. Here, for these models, we know these plots won’t be trust-worthy but it can still be interesting.

Create and read plots

Hands-on: Create plots from Community metrics file and GLMM results

Create a plot from GLM data ( Galaxy version 0.0.2) with following parameters:

  • param-file “Input glm results file”: #Concatenate #Community #unitobs ‘GLM - results from your community analysis’ data file
  • param-file “Data table used for glm”: #Concatenate #Community metrics data file
  • param-file “Unitobs table used for glm”: #Concatenate #unitobs data file

The output must be a data collection with four PNG files.

Community analysis plots. Open image in new tab

Figure 2: Community analysis plots

Each PNG file contains two plots :

  • In the upper plot (blue), the line represents the “Estimate” values for each year and the confidence interval is the light blue ribbon. There is no significantly different year here but, usually, it is represented by a white dot inside the blue point of the “Estimate” value of the year. The writing on top of the plot is the “Estimate” value for the whole time-series (year as continuous variable), if nothing else is written it isn’t significant.
  • In the lower plot (purple), the line represents the observed mean of the species richness for each year (calculated directly from the input metrics data table). If the interest variable had been a presence-absence, it would have been a presence proportion and if it had been an abundance it would have been a raw abundance (sum of all abundances each year).

We’ll ignore the ‘global’ analysis plot as it associate data from different communities. We see on both plots of each of the three surveys that, as predicted, species richness haven’t varied much as few species are taken into account in the analysed data set and these species are very commonly found as we selected only ‘Standard species’ when downloading the datasets. Hence, mean species richness are globally around the maximum number of species taken into account in the surveys (7 for SWC-IBTS, 6 for EVHOE and 3 for BITS). Moreover, confidence intervals are very wide and global trends are around 1.

Compute GLMMs and create plots on Population metrics

For the Population analysis we have the choice to test the effect of Year and Site on:

  • “Abundance”
  • or “Presence-absence”

As a GLM(M) permits to take into account only one interest variable at a time, we choose to take “Abundance” as the interest variable, namely the quantity of a given species at a given time and location. This metric is located on the fourth column of the #EVHOE, #BITS and #SWCIBTS Population metrics data files.

However, if you’re interested to test the effects of Year and Site on “Presence-absence” you may compute the GLM(M) tool again and choose the fifth column of the #EVHOE, #BITS and #SWCIBTS Population metrics data files.

Hands-on: Compute GLMM on Population metrics
  1. Compute GLM on population data ( Galaxy version 0.0.2) with following parameters:
    • param-files “Input metrics file”: #EVHOE, #BITS and #SWCIBTS metrics (here presence absence) data files
    • param-file “Unitobs informations file”: #Concatenate #unitobs data file
    • param-select “Interest variable from metrics file”: Column: 4
    • param-select “Response variables”: Year Site
    • param-select “Random effect?”: Site
    • param-select “Specify advanced parameters”: No, use program defaults

    The three outputs for each survey must have three tags #Concatenate #SurveyID #unitobs.

    The first files of each survey named ‘GLM - results from your population analysis’ must contain one line per GLM processed, it has been formated this way to make GLM results easier to represent and modify if needed. However, this format is often not suited to read directly the results on Galaxy as Galaxy handles better tabular files with a lot of lines rather than files with a lot of columns. So, if your files doesn’t display properly on Galaxy as a data table, we advise to do the following optional step.

  2. (optional) Transpose rows/columns in a tabular file ( Galaxy version 1.1.0) with #Concatenate #EVHOE #unitobs #BITS #Concatenate #unitobs #Concatenate #SWCIBTS #unitobs ‘GLM - results from your population analysis’ data files

Read and interpret raw GLM outputs

The three outputs for each time the population GLM tool runs are the same as in the community GLM tool described in the previous part 3. 1. 1. Read and interpret raw GLM outputs. For the need of this tutorial, we’ll be analyzing only the BITS survey analysis results.

First output: ‘GLM - results from your population analysis’

First, on the #BITS #Concatenate #unitobs ‘GLM - results from your population analysis’ data file, we see three analyses one for each species in the BITS survey: Gadus morhua (Atlantic cod), Platichthys flesus (European flounder) and Pleuronectes platessa (European plaice).

BITS survey standard fish species. Open image in new tab

Figure 3: BITS survey standard fish species

We also see the Gaussian distribution has been automatically selected by the tool. It seems right even if the interest variable “Abundance” is usually a count, here it is a Catch Per Unit Effort abundance so it isn’t a round value.

Then, the details of what contains each field in this file has been developped in the previous part on community analyses 3. 1. 1. 1. First output: ‘GLM - results from your community analysis’.

Three statistics about the random effect Site are given in this first file: standard deviation, number of observations taken into account in the model and number of levels in the random effect. As 'site' have been set as a random effect, pseudo-replication caused by the factor Site variable is taken into account to fit the model as well as its effects on the “Abundance” but it is not tested so we can’t make any conclusion regarding its effects on CPUE abundance.

As said above, the tool is computing two GLMMs when Year is selected as a fixed effect:

  • one GLMM with Year as a continuous variable with results on fields “year Estimate”, “year Std.Err”, “year Zvalue”, “year Pvalue”, “year IC_up”, “year IC_inf” and “year signif”.
  • one GLMM with Year as a qualitative variable in the same fields with each Year’s levels as “YYYY Estimate”, “YYYY Std.Err”, “YYYY Zvalue”, “YYYY Pvalue”, “YYYY IC_up”, “YYYY IC_inf” and “YYYY signif”.

The “(Intercept)” value represents the reference value, it is rarely used for interpretations.

Regarding the significance of the effect Year as continuous variable:

  • It isn’t significant in the Gadus morhua model.
  • It is significant in the Platichthys flesus model.
  • It is significant in the Pleuronectes platessa model.
Question

What does these results on the effect Year as continuous variable mean?

The question behind the test of this effect is: “Is the global temporal trend different from 1?” When it isn’t significant as in the Gadus morhua model, it means the “year Estimate” value isn’t significantly different from 1 so the interest variable “Abundance” hasn’t varied much through time. When it is significant as in the two other models, the “year Estimate” value is significantly different from 1 so the interest variable “Abundance” has varied through time.

These results are consistent with the results on the significance of the effects Year as qualitative variable:

  • Only one year out of 30 considered significantly different in the Gadus morhua model. On year 1995.
  • 14 years out of 30 considered significantly different in the Platichthys flesus model. On years 2001, 2002, 2005, 2007, 2008, 2010 to 2017 and 2019.
  • 8 years out of 30 considered significantly different in the Pleuronectes platessa model. From year 2012 to 2019.

Second output: ‘Simple statistics on chosen variables’

The second output file doesn’t tell much about the statistic models, it contains details for you to have an outlook on the interest variable of the input data file containing the population metrics. We can see for example in the ‘Statistics per combination of factor levels’ part that the median value for the CPUE abundance in the location “22” in 1991 is 6.862473.

Third output: ‘Your analysis rating file’

The third output will help us get a supplementary layer of understanding and take a step back on the quality of the models performed. We see the global rate is 5.5 out of 10 so it seems the analyses are of better quality than the community analysis but we need to see each analysis individually to make real conclusions. The best rates are for the analyses on Gadus morhua and Platichthys flesus 5.5 out of 8 which is a nice rate. However, the models can still be improved by removing the random effect. As residuals aren’t uniform, we could select another distribution but dispersion of residuals and residuals outliers are regular so we don’t advise it. All analyses checked an important critera: the dispersion of residuals is regular so, more broadly we don’t advise changing the distribution for any of these models.

You can see in the last part of the file ‘Red flags - advice’, some advices to improve your models but the issues detected in models can come from different reasons and may be hard to correct. Hence, if you really want to improve your models, you can try to get a tighter geographical resolution in order to get more locations and sites to keep the random effect on 'site'. You can also try to remove biased observations from your original dataset by finding out more about the sampling methods used (years with different methods or different fleet for example).

Summary

With all this interpretation made from raw results, we still don’t really visualize these results clearly. For this, it could be nice to get a graphical representation of the GLMMs results and the interest variable. Here, for these models, the plots we’ll create will certainly be more trust-worthy than the previous Community analyses. Hence, more interesting to look at.

Create and read plots

Hands-on: Create plots from Population metrics file and GLMM results

Create a plot from GLM data ( Galaxy version 0.0.2) with following parameters:

  • param-files “Input glm results file”: #Concatenate #EVHOE #unitobs #BITS #Concatenate #unitobs #Concatenate #SWCIBTS #unitobs ‘GLM - results from your population analysis’ data files
  • param-files “Data table used for glm”: #EVHOE, #BITS and #SWCIBTS metrics data files
  • param-file “Unitobs table used for glm”: #Concatenate #unitobs data file

The three outputs must be a data collection.

See the previous part 3. 1. 2. Create and read plots to get details on output PNG files. As the interest variable is “Abundance”, the plot with a purple line represents raw abundance: the sum of all abundances of the studied species for one year.

BITS population analysis plots. Open image in new tab

Figure 4: BITS population analysis plots

On the Gadus morhua plots, only small variations of the abundance occured between 1991 and 2020 apart for year 1995 where we see a huge augmentation for the estimated value and the raw abundance (value almost tripled). As the values are coming back to an average range of values the following year, there should be some bias or even a count or typing mistake in the dataset.

Question

How can we see if there is a mistake in the dataframe? How can we deal with it?

To see if there is an abnormal value in the 'number' field representing the CPUE abundance we’ll use the Sort data in ascending or descending order ( Galaxy version 1.1.1) tool in the “Text Manipulation” tool collection with following parameters :

  • param-files “Sort Query”: #BITS ‘Calculate presence absence table’ data file
  • param-text “Number of header lines”: 1
  • “1: Column selections”
    • param-select “on column”: Column: 4
    • param-check “in”: Descending order
    • param-check “Flavor”: Fast numeric sort (-n)
    • param-select “Output unique values”: No
    • param-select “Ignore case”: No

The first value should be a measure of Gadus morhua on year “1995” and location “BITS-23”, this value is of ‘13253.12023’ which is way higher than the next biggest value ‘4709.504184’. This value may create bias in the statistical model so, even if we won’t develop it here, you can remove this line from the #BITS ‘Calculate presence absence table’ data file and re-run the model.

We see on both plots of Platichthys flesus and Pleuronectes platessa that CPUE abundance has significantly increased since 30 years. Both species had a first CPUE abundance increase around 2000 that can be explained by a fleet change in the trawl survey around this time. Then, for Platichthys flesus, after a decrease in 2003 had a more or less stable CPUE abundance. For Pleuronectes platessa a second wave of increase occured between 2008 and 2013 to decrease after 2018.

EVHOE population analysis plots. Open image in new tab

Figure 5: EVHOE population analysis plots
SWCIBTS population analysis plots. Open image in new tab

Figure 6: SWCIBTS population analysis plots

Conclusion

In this tutorial, you analyzed abundance data from three trawl surveys with an ecological analysis workflow. You learned how to pre-process abundance data with Galaxy and compute Community and Population metrics. You know now how to construct a proper GL(M)M easily and interpret its results. The construction of a Generalized Linear (Mixed) Model has to be well thought out and may need corrections a posteriori by the use of common tests that helps evaluate the quality of your GL(M)M (found in the rating file).