# 16S Microbial Analysis with mothur (extended)

### Overview

question Questions
• What is the effect of normal variation in the gut microbiome on host health?

objectives Objectives
• Analyze of 16S rRNA sequencing data using the mothur toolsuite in Galaxy

• Using a mock community to assess the error rate of your sequencing experiment

• Visualize sample diversity using Krona and Phinch

requirements Requirements

time Time estimation: 6 hours

Supporting Materials

last_modification Last modification: Dec 1, 2020

# Overview

In this tutorial we will perform an analysis based on the Standard Operating Procedure (SOP) for MiSeq data, developed by the Schloss lab, the creators of the mothur software package Schloss et al. 2009.

### comment Note: Two versions of this tutorial

Because this tutorial consists of many steps, we have made two versions of it, one long and one short.

This is the extended version. We will run every tool manually and discuss the results in detail. If you would like to run through the tutorial a bit quicker and use workflows to run groups of analysis steps (e.g. data cleaning) at once, please see the shorter version of this tutorial

You can also switch between the long and short version at the start of any section.

### Agenda

In this tutorial, we will cover:

### comment Note: results may vary

Your results may be slightly different from the ones presented in this tutorial due to differing versions of tools, reference data, external databases, or because of stochastic processes in the algorithms.

# Obtaining and preparing data

In this tutorial we use 16S rRNA data, but similar pipelines can be used for WGS data.

### comment Background: The 16S ribosomal RNA gene

The 16S rRNA gene has several properties that make it ideally suited for our purposes

1. Present in all prokaryotes
2. Highly conserved + highly variable regions
3. Huge reference databases

The highly conserved regions make it easy to target the gene across different organisms, while the highly variable regions allow us to distinguish between different species.

(slide credit https://www.slideshare.net/beiko/ccbc-tutorial-beiko)

## Understanding our input data

In this tutorial we use the dataset generated by the Schloss lab to illustrate their MiSeq SOP.

They describe the experiment as follows:

“The Schloss lab is interested in understanding the effect of normal variation in the gut microbiome on host health. To that end, we collected fresh feces from mice on a daily basis for 365 days post weaning. During the first 150 days post weaning (dpw), nothing was done to our mice except allow them to eat, get fat, and be merry. We were curious whether the rapid change in weight observed during the first 10 dpw affected the stability microbiome compared to the microbiome observed between days 140 and 150.”

To speed up analysis for this tutorial, we will use only a subset of this data. We will look at a single mouse at 10 different time points (5 early, 5 late). In order to assess the error rate of the analysis pipeline and experimental setup, the Schloss lab additionally sequenced a mock community with a known composition (genomic DNA from 21 bacterial strains). The sequences used for this mock sample are contained in the file HMP_MOCK.v35.fasta

### comment Dataset naming scheme

For this tutorial, you are given 10 pairs of files. For example, the following pair of files:
F3D0_S188_L001_R1_001.fastq
F3D0_S188_L001_R2_001.fastq

The first part of the file name indicates the sample; F3D0 here signifies that this sample was obtained from Female 3 on Day 0. The rest of the file name is identical, except for _R1 and _R2, this is used to indicate the forward and reverse reads respectively.

## Importing the data into Galaxy

Now that we know what our input data is, let’s get it into our Galaxy history:

All data required for this tutorial has been made available from Zenodo

### hands_on Hands-on: Obtaining our data

1. Make sure you have an empty analysis history. Give it a name.

### tip Tip: Creating a new history

Click the new-history icon at the top of the history panel

If the new-history is missing:

1. Click on the galaxy-gear icon (History options) on the top of the history panel
2. Select the option Create New from the menu
2. Import Sample Data.
• Import the sample FASTQ files to your history, either from a shared data library (if available), or from Zenodo using the URLs listed in the box below (click param-repeat to expand):

### solution List of Zenodo URLs

https://zenodo.org/record/800651/files/F3D0_R1.fastq
https://zenodo.org/record/800651/files/F3D0_R2.fastq
https://zenodo.org/record/800651/files/F3D141_R1.fastq
https://zenodo.org/record/800651/files/F3D141_R2.fastq
https://zenodo.org/record/800651/files/F3D142_R1.fastq
https://zenodo.org/record/800651/files/F3D142_R2.fastq
https://zenodo.org/record/800651/files/F3D143_R1.fastq
https://zenodo.org/record/800651/files/F3D143_R2.fastq
https://zenodo.org/record/800651/files/F3D144_R1.fastq
https://zenodo.org/record/800651/files/F3D144_R2.fastq
https://zenodo.org/record/800651/files/F3D145_R1.fastq
https://zenodo.org/record/800651/files/F3D145_R2.fastq
https://zenodo.org/record/800651/files/F3D146_R1.fastq
https://zenodo.org/record/800651/files/F3D146_R2.fastq
https://zenodo.org/record/800651/files/F3D147_R1.fastq
https://zenodo.org/record/800651/files/F3D147_R2.fastq
https://zenodo.org/record/800651/files/F3D148_R1.fastq
https://zenodo.org/record/800651/files/F3D148_R2.fastq
https://zenodo.org/record/800651/files/F3D149_R1.fastq
https://zenodo.org/record/800651/files/F3D149_R2.fastq
https://zenodo.org/record/800651/files/F3D150_R1.fastq
https://zenodo.org/record/800651/files/F3D150_R2.fastq
https://zenodo.org/record/800651/files/F3D1_R1.fastq
https://zenodo.org/record/800651/files/F3D1_R2.fastq
https://zenodo.org/record/800651/files/F3D2_R1.fastq
https://zenodo.org/record/800651/files/F3D2_R2.fastq
https://zenodo.org/record/800651/files/F3D3_R1.fastq
https://zenodo.org/record/800651/files/F3D3_R2.fastq
https://zenodo.org/record/800651/files/F3D5_R1.fastq
https://zenodo.org/record/800651/files/F3D5_R2.fastq
https://zenodo.org/record/800651/files/F3D6_R1.fastq
https://zenodo.org/record/800651/files/F3D6_R2.fastq
https://zenodo.org/record/800651/files/F3D7_R1.fastq
https://zenodo.org/record/800651/files/F3D7_R2.fastq
https://zenodo.org/record/800651/files/F3D8_R1.fastq
https://zenodo.org/record/800651/files/F3D8_R2.fastq
https://zenodo.org/record/800651/files/F3D9_R1.fastq
https://zenodo.org/record/800651/files/F3D9_R2.fastq
https://zenodo.org/record/800651/files/Mock_R1.fastq
https://zenodo.org/record/800651/files/Mock_R2.fastq

• Open the Galaxy Upload Manager (galaxy-upload on the top-right of the tool panel)

• Select Paste/Fetch Data
• Paste the link into the text field

• Press Start

• Close the window

By default, Galaxy uses the URL as the name, so rename the files with a more useful name.

### tip Tip: Importing data from a data library

As an alternative to uploading the data from a URL or your computer, the files may also have been made available from a shared data library:

• Go into Shared data (top panel) then Data libraries

• Select the desired files
• Click on the To History button near the top and select as Datasets from the dropdown menu
• In the pop-up window, select the history you want to import the files to (or create a new one)
• Click on Import
3. Import Reference Data
• Import the following reference datasets
• silva.v4.fasta
• HMP_MOCK.v35.fasta
• trainset9_032012.pds.fasta
• trainset9_032012.pds.tax

### solution List of Zenodo URLs

https://zenodo.org/record/800651/files/HMP_MOCK.v35.fasta
https://zenodo.org/record/800651/files/silva.v4.fasta
https://zenodo.org/record/800651/files/trainset9_032012.pds.fasta
https://zenodo.org/record/800651/files/trainset9_032012.pds.tax


Now that’s a lot of files to manage. Luckily Galaxy can make life a bit easier by allowing us to create dataset collections. This enables us to easily run tools on multiple datasets at once.

Since we have paired-end data, each sample consist of two separate fastq files, one containing the forward reads, and one containing the reverse reads. We can recognize the pairing from the file names, which will differ only by _R1 or _R2 in the filename. We can tell Galaxy about this paired naming convention, so that our tools will know which files belong together. We do this by building a List of Dataset Pairs

### hands_on Hands-on: Organizing our data into a paired collection

1. Click on the checkmark icon param-check at top of your history.

2. Select all the FASTQ files (40 in total)
• Tip: type fastq in the search bar at the top of your history to filter only the FASTQ files; you can now use the All button at the top instead of having to individually select all 40 input files.
• Click on for all selected..
• Select Build List of Dataset Pairs from the dropdown menu

In the next dialog window you can create the list of pairs. By default Galaxy will look for pairs of files that differ only by a _1 and _2 part in their names. In our case however, these should be _R1 and _R2.

3. Change these values accordingly
• Change _1 to _R1 in the text field on the top left
• Change _2 to _R2 om the text field on the top right

You should now see a list of pairs suggested by Galaxy:

4. Click on auto-pair to create the suggested pairs.

5. Name the pairs
• The middle segment is the name for each pair.
• These names will be used as sample names in the downstream analysis, so always make sure they are informative!
• Check that the pairs are named F3D0-F3D9, F3D141-F3D150 and Mock.
• If needed, the names can be edited by clicking on them
• Important: On older Galaxy versions, if the files were imported via URL, they may have the full URL as sample name; please remove everything except the sample name for each pair!
6. Name your collection at the bottom right of the screen
7. Click the Create List button. A new dataset collection item will now appear in your history

# Quality Control

exchange Switch to short tutorial

Before starting any analysis, it is always a good idea to assess the quality of your input data and improve it where possible by trimming and filtering reads. The mothur toolsuite contains several tools to assist with this task. We will begin by merging our reads into contigs, followed by filtering and trimming of reads based on quality score and several other metrics.

## Create contigs from paired-end reads

In this experiment, paired-end sequencing of the ~253 bp V4 region of the 16S rRNA gene was performed. The sequencing was done from either end of each fragment. Because the reads are about 250 bp in length, this results in a significant overlap between the forward and reverse reads in each pair. We will combine these pairs of reads into contigs.

The Make.contigs tool creates the contigs, and uses the paired collection as input. Make.contigs will look at each pair, take the reverse complement reverse read, and then determine the overlap between the two sequences. Where an overlapping base call differs between the two reads, the quality score is used to determine the consensus base call. A new quality score is derived by combining the two original quality scores in both of the reads for all the overlapping positions.

### hands_on Hands-on: Combine forward and reverse reads into contigs

• Make.contigs tool with the following parameters
• param-select “Way to provide files”: Multiple pairs - Combo mode
• param-collection “Fastq pairs”: the collection you just created
• Leave all other parameters to the default settings

This step combined the forward and reverse reads for each sample, and also combined the resulting contigs from all samples into a single file. So we have gone from a paired collection of 20x2 FASTQ files, to a single FASTA file. In order to retain information about which reads originated from which samples, the tool also output a group file. View that file now, it should look something like this:

M00967_43_000000000-A3JHG_1_1101_10011_3881     F3D0
M00967_43_000000000-A3JHG_1_1101_10050_15564    F3D0
M00967_43_000000000-A3JHG_1_1101_10051_26098    F3D0
[..]


Here the first column contains the read name, and the second column contains the sample name.

## Data Cleaning

As the next step, we want to improve the quality of our data. But first, let’s get a feel of our dataset:

### hands_on Hands-on: Summarize data

• Summary.seqs tool with the following parameters
• param-file “fasta”: the trim.contigs.fasta file created by Make.contigs tool
• “Output logfile?”: yes

The summary output files give information per read. The logfile outputs also contain some summary statistics:

             Start    End        NBases     Ambigs   Polymer  NumSeqs
Minimum:     1        248        248        0        3        1
2.5%-tile:   1        252        252        0        3        3810
25%-tile:    1        252        252        0        4        38091
Median:      1        252        252        0        4        76181
75%-tile:    1        253        253        0        5        114271
97.5%-tile:  1        253        253        6        6        148552
Maximum:     1        502        502        249      243      152360
Mean:        1        252.811    252.811    0.70063  4.44854
# of Seqs:   152360


In this dataset:

• Almost all of the reads are between 248 and 253 bases long.
• 2,5% or more of our reads had ambiguous base calls (Ambigs column).
• The longest read in the dataset is 502 bases.
• There are 152,360 sequences.

Our region of interest, the V4 region of the 16S gene, is only around 250 bases long. Any reads significantly longer than this expected value likely did not assemble well in the Make.contigs step. Furthermore, we see that 2,5% of our reads had between 6 and 249 ambiguous base calls (Ambigs column). In the next steps we will clean up our data by removing these problematic reads.

We do this data cleaning using the Screen.seqs tool, which removes

1. sequences with ambiguous bases (maxambig) and
2. contigs longer than a given threshold (maxlength).

### hands_on Hands-on: Filter reads based on quality and length

• Screen.seqs tool with the following parameters
• param-file “fasta”: the trim.contigs.fasta file created by Make.contigs tool
• param-file “group”: the group file created in the Make.contigs tool step
• “maxlength”: 275
• “maxambig”: 0

### question Question

How many reads were removed in this screening step? (Hint: run the summary.seqs tool again)

### solution Solution

23,488.

This can be determined by looking at the number of lines in bad.accnos output of screen.seqs or by comparing the total number of seqs between of the summary log before and after this screening step

## Optimize files for computation

Microbiome samples typically contain a large numbers of the same organism, and therefore we expect to find many identical sequences in our data. In order to speed up computation, we first determine the unique reads, and then record how many times each of these different reads was observed in the original dataset. We do this by using the Unique.seqs tool.

### hands_on Hands-on: Remove duplicate sequences

• Unique.seqs tool with the following parameters
• param-file “fasta”: the good.fasta output from Screen.seqs tool
• “output format”: Name File

### question Question

How many sequences were unique? How many duplicates were removed?

### solution Solution

16,426 unique sequences and 112,446 duplicates.

This can be determined from the number of lines in the fasta (or names) output, compared to the number of lines in the fasta file before this step.

Here we see that this step has greatly reduced the size of our sequence file; not only will this speed up further computational steps, it will also greatly reduce the amount of disk space (and your Galaxy quota) needed to store all the intermediate files generated during this analysis. This Unique.seqs tool created two files, one is a FASTA file containing only the unique sequences, and the second is a so-called names file. This names file consists of two columns, the first contains the sequence names for each of the unique sequences, and the second column contains all other sequence names that are identical to the representative sequence in the first column.

name          representatives
...


To recap, we now have the following files:

• a FASTA file containing every distinct sequence in our dataset (the representative sequences)
• a names file containing the list of duplicate sequences
• a group file containing information about the samples each read originated from

To further reduce file sizes and streamline analysis, we can use the Count.seqs tool to combine the group file and the names file into a single count table.

### hands_on Hands-on: Generate count table

• Count.seqs tool with the following parameters
• param-file “name”: the names output from Unique.seqs tool
• “Use a Group file”: yes
• param-file “group”: the group file we created using the Screen.seqs tool

Have a look at the count_table output from the Count.seqs tool, it summarizes the number of times each unique sequence was observed across each of the samples. It will look something like this:

Representative_Sequence                      total   F3D0   F3D1  F3D141  F3D142  ...
M00967_43_000000000-A3JHG_1_1101_14069_1827  4402    370    29    257     142
M00967_43_000000000-A3JHG_1_1101_18044_1900  28      1      0     1       0
M00967_43_000000000-A3JHG_1_1101_13234_1983  10522   425    281   340     205
...


The first column contains the read names of the representative sequences, and the subsequent columns contain the number of duplicates of this sequence observed in each sample.

### comment Representative sequences vs Total sequences

From now on, we will only work with the set of unique sequences, but it’s important to remember that these represent a larger number of total sequences, which we keep track of in the count table.

The Summary.seqs tool tool will report both the number of unique representative sequences as well as the total sequences they represent.

# Sequence Alignment

exchange Switch to short tutorial

We are now ready to align our sequences to the reference. This is an important step to improve the clustering of your OTUs Schloss 2012.

### hands_on Hands-on: Align sequences

1. Align.seqs tool with the following parameters
• param-file “fasta”: the fasta output from Unique.seqs tool
• param-file “reference”: silva.v4.fasta reference file from your history

### question Question

Have a look at the alignment output, what do you see?

### solution Solution

At first glance, it might look like there is not much information there. We see our read names, but only period . characters below it.

>M00967_43_000000000-A3JHG_1_1101_14069_1827
............................................................................
>M00967_43_000000000-A3JHG_1_1101_18044_1900
............................................................................


This is because the V4 region is located further down our reference database and nothing aligns to the start of it. If you scroll to right you will start seeing some more informative bits:

.....T-------AC---GG-AG-GAT------------


Here we start seeing how our sequences align to the reference database. There are different alignment characters in this output:

• .: terminal gap character (before the first or after the last base in our query sequence)
• -: gap character within the query sequence

We will cut out only the V4 region in a later step (Filter.seqs tool)

2. Summary.seqs tool with the following parameters:
• param-file “fasta”: the align output from Align.seqs tool
• param-file “count”: count_table output from Count.seqs tool
• “Output logfile?”: yes

Have a look at the summary output (log file):

            Start    End      NBases  Ambigs   Polymer  NumSeqs
Minimum:    1250     10693    250     0        3        1
2.5%-tile:  1968     11550    252     0        3        3222
25%-tile:   1968     11550    252     0        4        32219
Median:     1968     11550    252     0        4        64437
75%-tile:   1968     11550    253     0        5        96655
97.5%-tile: 1968     11550    253     0        6        125651
Maximum:    1982     13400    270     0        12       128872
Mean:       1967.99  11550    252.462 0        4.36693
# of unique seqs:   16426
total # of seqs:    128872


The Start and End columns tell us that the majority of reads aligned between positions 1968 and 11550, which is what we expect to find given the reference file we used. However, some reads align to very different positions, which could indicate insertions or deletions at the terminal ends of the alignments or other complicating factors.

Also notice the Polymer column in the output table. This indicates the average homopolymer length. Since we know that our reference database does not contain any homopolymer stretches longer than 8 reads, any reads containing such long stretches are likely the result of PCR errors and we would be wise to remove them.

Next we will clean our data further by removing poorly aligned sequences and any sequences with long homopolymer stretches.

## More Data Cleaning

To ensure that all our reads overlap our region of interest, we will:

1. Remove any reads not overlapping the region V4 region (position 1968 to 11550) using Screen.seqs tool.
2. Remove any overhang on either end of the V4 region to ensure our sequences overlap only the V4 region, using Filter.seqs tool.
3. Clean our alignment file by removing any columns that have a gap character (-, or . for terminal gaps) at that position in every sequence (also using Filter.seqs tool).
4. Group near-identical sequences together with Pre.cluster tool. Sequences that only differ by one or two bases at this point are likely to represent sequencing errors rather than true biological variation, so we will cluster such sequences together.

### hands_on Hands-on: Remove poorly aligned sequences

1. Screen.seqs tool with the following parameters
• param-file “fasta”: the aligned fasta file from Align.seqs tool
• “start”: 1968
• “end”: 11550
• “maxhomop”: 8
• param-file “count”: the count table file from Count.seqs tool

Note: we supply the count table so that it can be updated for the sequences we’re removing.

### question Question

How many sequences were removed in this step?

### solution Solution

128 sequences were removed. This is the number of lines in the bad.accnos output.

Next, we will remove any overhang on either side of the V4 region, and

2. Filter.seqs tool with the following parameters
• param-file “fasta”: good.fasta output from the latest Screen.seqs tool
• “vertical”: yes
• “trump”: .
• “Output logfile”: yes

Your resulting alignment (filtered fasta output) should look something like this:

>M00967_43_000000000-A3JHG_1_1101_14069_1827
TAC--GG-AG-GAT--GCG-A-G-C-G-T-T--AT-C-CGG-AT--TT-A-T-T--GG-GT--TT-A-AA-GG-GT-GC-G-TA-GGC-G-G-C-CT-G-C-C-AA-G-T-C-A-G-C-G-G--TA-A-AA-TT-G-C-GG-GG--CT-C-AA-C-C-C-C-G-T-A--CA-G-C-CGTT-GAAAC-TG-C-CGGGC-TCGA-GT-GG-GC-GA-G-A---AG-T-A-TGCGGAATGCGTGGTGT-AGCGGT-GAAATGCATAG-AT-A-TC-AC-GC-AG-AACCCCGAT-TGCGAAGGCA------GC-ATA-CCG-G-CG-CC-C-T-ACTGACG-CTGA-GGCA-CGAAA-GTG-CGGGG-ATC-AAACAGG
>M00967_43_000000000-A3JHG_1_1101_18044_1900
TAC--GG-AG-GAT--GCG-A-G-C-G-T-T--GT-C-CGG-AA--TC-A-C-T--GG-GC--GT-A-AA-GG-GC-GC-G-TA-GGC-G-G-T-TT-A-A-T-AA-G-T-C-A-G-T-G-G--TG-A-AA-AC-T-G-AG-GG--CT-C-AA-C-C-C-T-C-A-G-CCT-G-C-CACT-GATAC-TG-T-TAGAC-TTGA-GT-AT-GG-AA-G-A---GG-A-G-AATGGAATTCCTAGTGT-AGCGGT-GAAATGCGTAG-AT-A-TT-AG-GA-GG-AACACCAGT-GGCGAAGGCG------AT-TCT-CTG-G-GC-CA-A-G-ACTGACG-CTGA-GGCG-CGAAA-GCG-TGGGG-AGC-AAACAGG
>M00967_43_000000000-A3JHG_1_1101_13234_1983
TAC--GG-AG-GAT--GCG-A-G-C-G-T-T--AT-C-CGG-AT--TT-A-T-T--GG-GT--TT-A-AA-GG-GT-GC-G-CA-GGC-G-G-A-AG-A-T-C-AA-G-T-C-A-G-C-G-G--TA-A-AA-TT-G-A-GA-GG--CT-C-AA-C-C-T-C-T-T-C--GA-G-C-CGTT-GAAAC-TG-G-TTTTC-TTGA-GT-GA-GC-GA-G-A---AG-T-A-TGCGGAATGCGTGGTGT-AGCGGT-GAAATGCATAG-AT-A-TC-AC-GC-AG-AACTCCGAT-TGCGAAGGCA------GC-ATA-CCG-G-CG-CT-C-A-ACTGACG-CTCA-TGCA-CGAAA-GTG-TGGGT-ATC-GAACAGG


These are all our representative reads again, now with additional alignment information.

In the log file of the Filter.seqs step we see the following additional information:

Length of filtered alignment: 376
Number of columns removed: 13049
Length of the original alignment: 13425
Number of sequences used to construct filter: 16298


From this log file we see that while our initial alignment was 13425 positions wide, after filtering the overhangs (trump parameter) and removing positions that had a gap in every aligned read (vertical parameter), we have trimmed our alignment down to a length of 376.

Because any filtering step we perform might lead to sequences no longer being unique, we deduplicate our data by re-running the Unique.seqs tool:

### hands_on Hands-on: Re-obtain unique sequences

• Unique.seqs tool with the following parameters
• param-file “fasta”: the filtered fasta output from Filter.seqs tool
• param-file “name file or count table”: the count table from the last Screen.seqs tool

### question Question

How many duplicate sequences did our filter step produce?

### solution Solution

3: The number of unique sequences was reduced from 16298 to 16295

### Pre-clustering

The next step in cleaning our data, is to merge near-identical sequences together. Sequences that only differ by around 1 in every 100 bases are likely to represent sequencing errors, not true biological variation. Because our contigs are ~250 bp long, we will set the threshold to 2 mismatches.

### hands_on Hands-on: Perform preliminary clustering of sequences

• Pre.cluster tool with the following parameters
• param-file “fasta”: the fasta output from the last Unique.seqs tool run
• param-file “name file or count table”: the count table from the last Unique.seqs tool
• “diffs”: 2

### question Question

How many unique sequences are we left with after this clustering of highly similar sequences?

### solution Solution

5720: This is the number of lines in the fasta output

## Chimera Removal

We have now thoroughly cleaned our data and removed as much sequencing error as we can. Next, we will look at a class of sequencing artefacts known as chimeras.

During PCR amplification, it is possible that two unrelated templates are combined to form a sort of hybrid sequence, also called a chimera. Needless to say, we do not want such sequencing artefacts confounding our results. We’ll do this chimera removal using the VSEARCH algorithm Rognes et al. 2016 that is called within mothur, using the Chimera.vsearch tool tool.

### comment Background: Chimeras

(slide credit: http://slideplayer.com/slide/4559004/ )

This command will split the data by sample and check for chimeras. The recommended way of doing this is to use the abundant sequences as our reference.

### hands_on Hands-on: Remove chimeric sequences

1. Chimera.vsearch tool with the following parameters
• param-file “fasta”: the fasta output from Pre.cluster tool
• param-select “Select Reference Template from”: Self
• param-file “count”: the count table from the last Pre.cluster tool
• param-check “dereplicate” to Yes

Running Chimera.vsearch with the count file will remove the chimeric sequences from the count table, but we still need to remove those sequences from the fasta file as well. We do this using Remove.seqs:

2. Remove.seqs tool with the following parameters
• param-file “accnos”: the vsearch.accnos file from Chimera.vsearch tool
• param-file “fasta”: the fasta output from Pre.cluster tool
• param-file “count”: the count table from Chimera.vsearch tool

### question Question

How many sequences were flagged as chimeric? what is the percentage? (Hint: summary.seqs)

### solution Solution

Looking at the chimera.vsearch accnos output, we see that 3,439 representative sequences were flagged as chimeric. If we run summary.seqs on the resulting fasta file and count table, we see that we went from 128,655 sequences down to 118,091 total sequences in this step, for a reduction of 10,564 total sequences, or 8.2%. This is a reasonable number of sequences to be flagged as chimeric.

# Taxonomic Classification

exchange Switch to short tutorial

Now that we have thoroughly cleaned our data, we are finally ready to assign a taxonomy to our sequences.

We will do this using a Bayesian classifier (via the Classify.seqs tool tool) and a mothur-formatted training set provided by the Schloss lab based on the RDP (Ribosomal Database Project, Cole et al. 2013) reference taxonomy.

### comment Background: Taxonomic assignment

In this tutorial we will use the RDP classifier and reference taxonomy for classification, but there are several different taxonomic assignment algorithms and reference databases available for this purpose.

An overview of different methods is given by Liu et al. 2008 and shown below:

The most commonly used reference taxonomies are:

The choice of taxonomic classifier and reference taxonomy can impact downstream results. The figure from Liu et al. 2008 given below shows the taxonomic composition determined when using different classifiers and reference taxonomies, for different primer sets (16S regions).

Which reference taxonomy is best for your experiments depends on a number of factors such as the type of sample and variable region sequenced.

Another discussion about how these different databases compare was described by Balvočiūtė and Huson 2017.

## Removal of non-bacterial sequences

Despite all we have done to improve data quality, there may still be more to do: there may be 18S rRNA gene fragments or 16S rRNA from Archaea, chloroplasts, and mitochondria that have survived all the cleaning steps up to this point. We are generally not interested in these sequences and want to remove them from our dataset.

### hands_on Hands-on: Taxonomic Classification and Removal of undesired sequences

1. Classify.seqs tool with the following parameters
• param-file “fasta”: the fasta output from Remove.seqs tool
• param-file “reference”: trainset9032012.pds.fasta from your history
• param-file “taxonomy”: trainset9032012.pds.tax from your history
• param-file “count”: the count table file from Remove.seqs tool

Have a look at the taxonomy output. You will see that every read now has a classification.

Now that everything is classified we want to remove our undesirables. We do this with the Remove.lineage tool:

2. Remove.lineage tool with the following parameters
• param-file “taxonomy”: the taxonomy output from Classify.seqs tool
• param-text “taxon - Manually select taxons for filtering”: Chloroplast-Mitochondria-unknown-Archaea-Eukaryota
• param-file “fasta”: the fasta output from Remove.seqs tool
• param-file “count”: the count table from Remove.seqs tool

### question Questions

1. How many unique (representative) sequences were removed in this step?
2. How many sequences in total?

### solution Solution

1. 20 representative sequences were removed. The fasta file output from Remove.seqs had 2281 sequences while the fasta output from Remove.lineages contained 2261 sequences.

2. 162 total sequences were removed. If you run summary.seqs with the count table, you will see that we now have 2261 unique sequences representing a total of 117,929 total sequences (down from 118,091 before). This means 162 of our sequences were in represented by these 20 representative sequences.

The data is now as clean as we can get it. In the next section we will use the Mock sample to assess how accurate our sequencing and bioinformatics pipeline is.

# Optional: Calculate error rates based on our mock community

exchange Switch to short tutorial

### comment Skipping the mock community analysis

The mock community analysis is optional. If you are low on time or want to skip ahead, you can jump straight to the next section where we will cluster our sequences into OTUs, classify them and perform some visualisations.

The following step is only possible if you have co-sequenced a mock community with your samples. A mock community is a sample of which you know the exact composition and is something we recommend to do, because it will give you an idea of how accurate your sequencing and analysis protocol is.

### comment Background: Mock communities

What is a mock community?

A mock community is an artificially constructed sample; a defined mixture of microbial cells and/or viruses or nucleic acid molecules created in vitro to simulate the composition of a microbiome sample or the nucleic acid isolated therefrom.

Why sequence a mock community?

In a mock community, we know exactly which sequences/organisms we expect to find, and at which proportions. Therefore, we can use such an artificial sample to assess the error rates of our sequencing and analysis pipeline.

• Did we miss any of the sequences we know to be present in the sample (false negatives)?
• Do we find any sequences that were not present in the sample (false positives)?
• Were we able to accurately detect their relative abundances?

If our workflow performed well on the mock sample, we have more confidence in the accuracy of the results on the rest of our samples.

Example

As an example, consider the following image from Fouhy et al Fouhy et al. 2016. A mock community sample was sequenced for different combinations of sequencer and primer sets (V-regions). Since we know the expected outcome, we can assess the accuracy of each pipeline. A similar approach can be used to assess different parameter settings of the in-silico analysis pipeline.

• Next generation sequencing data of a defined microbial mock community Singer et al. 2016
• 16S rRNA gene sequencing of mock microbial populations- impact of DNA extraction method, primer choice and sequencing platform Fouhy et al. 2016

The mock community in this experiment was composed of genomic DNA from 21 bacterial strains. So in a perfect world, this is exactly what we would expect the analysis to produce as a result.

First, let’s extract the sequences belonging to our mock samples from our data:

### hands_on Hands-on: extract mock sample from our dataset

• Get.groups tool with the following parameters
• param-file “group file or count table”: the count table from Remove.lineage tool
• param-select “groups”: Mock
• param-file “fasta”: fasta output from Remove.lineage tool
• param-check “output logfile?”: yes

In the log file we see the following:

Selected 58 sequences from your fasta file.
Selected 4046 sequences from your count file


The Mock sample has 58 unique sequences, representing a total of 4,046 total sequences.

The Seq.error tool measures the error rates using our mock reference. Here we align the reads from our mock sample back to their known sequences, to see how many fail to match.

### hands_on Hands-on: Assess error rates based on a mock community

• Seq.error tool with the following parameters
• param-file “pick.fasta”: the fasta output from Get.groups tool
• param-file “reference”: HMP_MOCK.v35.fasta file from your history
• param-file “count”: the count table from Get.groups tool
• param-check “output log?”: yes

In the log file we see something like this:

Overall error rate:    6.5108e-05
Errors    Sequences
0    3998
1    3
2    0
3    2
4    1
[..]


That is pretty good! The error rate is only 0.0065%! This gives us confidence that the rest of the samples are also of high quality, and we can continue with our analysis.

### Cluster mock sequences into OTUs

We will now estimate the accuracy of our sequencing and analysis pipeline by clustering the Mock sequences into OTUs, and comparing the results with the expected outcome.

### comment Background: What are Operational Taxonomic Units (OTUs)?

In 16S metagenomics approaches, OTUs are clusters of similar sequence variants of the 16S rDNA marker gene sequence. Each of these clusters is intended to represent a taxonomic unit of a bacteria species or genus depending on the sequence similarity threshold. Typically, OTU cluster are defined by a 97% identity threshold of the 16S gene sequence variants at species level. 98% or 99% identity is suggested for strain separation.

(Image credit: Danzeisen et al. 2013, 10.7717/peerj.237)

### hands_on Hands-on: Cluster mock sequences into OTUs

First we calculate the pairwise distances between our sequences

1. Dist.seqs tool with the following parameters
• param-file “fasta”: the fasta from Get.groups tool
• “cutoff”: 0.20

Next we group sequences into OTUs

2. Cluster - Assign sequences to OTUs tool with the following parameters
• param-file “column”: the dist output from Dist.seqs tool
• param-file “count”: the count table from Get.groups tool

Now we make a shared file that summarizes all our data into one handy table

3. Make.shared tool with the following parameters
• param-file “list”: the OTU list from Cluster tool
• param-file “count”: the count table from Get.groups tool
• “label”: 0.03 (this indicates we are interested in the clustering at a 97% identity threshold)

And now we generate intra-sample rarefaction curves

4. Rarefaction.single tool with the following parameters
• param-file “shared”: the shared file from Make.shared tool

### question Question

How many OTUs were identified in our mock community?

### solution Solution

This can be determined by opening the shared file or OTU list and looking at the header line. You will see a column for each OTU

Open the rarefaction output (dataset named sobs inside the rarefaction curves output collection), it should look something like this:

numsampled	0.03-	lci-	hci-
1	1.0000	1.0000	1.0000
100	18.0240	16.0000	20.0000
200	19.2160	17.0000	22.0000
300	19.8800	18.0000	22.0000
400	20.3600	19.0000	22.0000

[..]

3000	30.4320	28.0000	33.0000
3100	30.8800	28.0000	34.0000
3200	31.3200	29.0000	34.0000
3300	31.6320	29.0000	34.0000
3400	31.9920	30.0000	34.0000
3500	32.3440	30.0000	34.0000
3600	32.6560	31.0000	34.0000
3700	32.9920	31.0000	34.0000
3800	33.2880	32.0000	34.0000
3900	33.5920	32.0000	34.0000
4000	33.8560	33.0000	34.0000
4046	34.0000	34.0000	34.0000



When we use the full set of 4060 sequences, we find 34 OTUs from the Mock community; and with 3000 sequences, we find about 31 OTUs. In an ideal world, we would find exactly 21 OTUs. Despite our best efforts, some chimeras or other contaminations may have slipped through our filtering steps.

### comment Background: Rarefaction

To estimate the fraction of species sequenced, rarefaction curves are typically used. A rarefaction curve plots the number of species as a function of the number of individuals sampled. The curve usually begins with a steep slope, which at some point begins to flatten as fewer species are being discovered per sample: the gentler the slope, the less contribution of the sampling to the total number of operational taxonomic units or OTUs.

Green, most or all species have been sampled; blue, this habitat has not been exhaustively sampled; red, species rich habitat, only a small fraction has been sampled.

(A Primer on Metagenomics Wooley et al. 2010 )

Now that we have assessed our error rates we are ready for some real analysis.

# OTU Clustering

exchange Switch to short tutorial

In this tutorial we will continue with an OTU-based approach, for the phylotype and phylogenic approaches, please refer to the mothur wiki page.

### comment Background: What are Operational Taxonomic Units (OTUs)?

In 16S metagenomics approaches, OTUs are clusters of similar sequence variants of the 16S rDNA marker gene sequence. Each of these clusters is intended to represent a taxonomic unit of a bacteria species or genus depending on the sequence similarity threshold. Typically, OTU cluster are defined by a 97% identity threshold of the 16S gene sequence variants at species level. 98% or 99% identity is suggested for strain separation.

(Image credit: Danzeisen et al. 2013, 10.7717/peerj.237)

### Remove Mock Sample

Now that we have cleaned up our data set as best we can, and assured ourselves of the quality of our sequencing pipeline by considering a mock sample, we are almost ready to cluster and classify our real data. But before we start, we should first remove the Mock dataset from our data, as we no longer need it. We do this using the Remove.groups tool:

### hands_on Hands-on: Remove Mock community from our dataset

• Remove.groups tool with the following parameters
• param-select “Select input type”: fasta , name, taxonomy, or list with a group file or count table
• param-file “group or count table”: the pick.count_table output from Remove.lineage tool
• param-select “groups”: Mock
• param-file “fasta”: the pick.fasta output from Remove.lineage tool
• param-file “taxonomy”: the pick.taxonomy output from Remove.lineage tool

### Cluster sequences into OTUs

There are several ways we can perform clustering. For the Mock community, we used the traditional approach of using the Dist.seqs and Cluster tools. Alternatively, we can also use the Cluster.split tool. With this approach, the sequences are split into bins, and then clustered with each bin. Taxonomic information is used to guide this process. The Schloss lab have published results showing that if you split at the level of Order or Family, and cluster to a 0.03 cutoff, you’ll get just as good of clustering as you would with the “traditional” approach. In addition, this approach is less computationally expensive and can be parallelized, which is especially advantageous when you have large datasets.

We’ll now use the Cluster tool, with taxlevel set to 4, requesting that clustering be done at the Order level.

### hands_on Hands-on: Cluster our data into OTUs

1. Cluster.split tool with the following parameters
• “Split by”: Classification using fasta
• param-file “fasta”: the fasta output from Remove.groups tool
• param-file “taxonomy”: the taxonomy output from Remove.groups tool
• param-file “name file or count table”: the count table output from Remove.groups tool
• “taxlevel”: 4
• “cutoff”: 0.03

Next we want to know how many sequences are in each OTU from each group and we can do this using the Make.shared tool. Here we tell mothur that we’re really only interested in the 0.03 cutoff level:

2. Make.shared tool with the following parameters
• param-file “list”: the list output from Cluster.split tool
• param-file “count”: the count table from Remove.groups tool
• “label”: 0.03

We probably also want to know the taxonomy for each of our OTUs. We can get the consensus taxonomy for each OTU using the Classify.otu tool:

3. Classify.otu tool with the following parameters
• param-file “list”: the list output from Cluster.split tool
• param-file “count”: the count table from Remove.groups tool
• param-file “taxonomy”: the taxonomy output from Remove.groups tool
• “label”: 0.03

Examine galaxy-eye the taxonomy output of Classify.otu tool. This is a collection, and the different levels of taxonomy are shown in the names of the collection elements. In this example we only calculated one level, 0.03. This means we used a 97% similarity threshold. This threshold is commonly used to differentiate at species level.

Opening the taxonomy output for level 0.03 (meaning 97% similarity, or species level) shows a file structured like the following:

OTU       Size    Taxonomy
..
Otu0008	5260	Bacteria(100);"Bacteroidetes"(100);"Bacteroidia"(100);"Bacteroidales"(100);"Rikenellaceae"(100);Alistipes(100);
Otu0010	3058	Bacteria(100);Firmicutes(100);Bacilli(100);Lactobacillales(100);Lactobacillaceae(100);Lactobacillus(100);
Otu0013	1856	Bacteria(100);Firmicutes(100);Bacilli(100);Lactobacillales(100);Lactobacillaceae(100);Lactobacillus(100);
..


The first line shown in the snippet above indicates that Otu008 occurred 5260 times, and that all of the sequences (100%) were binned in the genus Alistipes.

### question Question

Which samples contained sequences belonging to an OTU classified as Staphylococcus?

### solution Solution

Examine the tax.summary file output by Classify.otu tool.

Samples F3D141, F3D142, F3D144, F3D145, F3D2. This answer can be found by examining the tax.summary output and finding the columns with nonzero values for the line of Staphylococcus

Before we continue, let’s remind ourselves what we set out to do. Our original question was about the stability of the microbiome and whether we could observe any change in community structure between the early and late samples.

Because some of our sample may contain more sequences than others, it is generally a good idea to normalize the dataset by subsampling.

### hands_on Hands-on: Subsampling

First we want to see how many sequences we have in each sample. We’ll do this with the Count.groups tool:

1. Count.groups tool with the following parameters
• param-file “shared”: the shared file from Make.shared tool

### question Question

How many sequences did the smallest sample consist of?

### solution Solution

The smallest sample is F3D143, and consists of 2389 sequences. This is a reasonable number, so we will now subsample all the other samples down to this level.

2. Sub.sample tool with the following parameters
• “Select type of data to subsample”: OTU Shared
• param-file “shared”: the shared file from Make.shared tool
• “size”: 2389

### question Question

What would you expect the result of count.groups on this new shared output collection to be? Check if you are correct.

### solution Solution

all groups (samples) should now have 2389 sequences. Run count.groups again on the shared output collection by the sub.sample tool to confirm that this is indeed what happened.

Note: since subsampling is a stochastic process, your results from any tools using this subsampled data will deviate from the ones presented here.

# Diversity Analysis

exchange Switch to short tutorial

Species diversity is a valuable tool for describing the ecological complexity of a single sample (alpha diversity) or between samples (beta diversity). However, diversity is not a physical quantity that can be measured directly, and many different metrics have been proposed to quantify diversity by Finotello et al. 2016.

### comment Background: Species Diversity

Species diversity consists of three components: species richness, taxonomic or phylogenetic diversity and species evenness.

• Species richness = the number of different species in a community.
• Species evenness = how even in numbers each species in a community is.
• Phylogenetic diversity = how closely related the species in a community are.

Each of these factors play a role in diversity, but how to combine them into a single measure of diversity is nontrivial. Many different metrics have been proposed for this, for example: shannon, chao, pd, ace, simpson, sobs, jack, npshannon, smithwilson, heip bergerparker, boney, efron, shen, solow, bootstrap, qstat, coverage, anderberg, hamming, jclass, jest, ochiai, canberra, thetayc, invsimpson, just to name a few ;). A comparison of several different diversity metrics is discussed in Bonilla-Rosso et al. 2012

### question Question

To understand the difference between richness and evenness, consider the following example:

1. Which of these communities has the highest richness?
2. Which of these communities has the highest evenness?

### solution Solution

1. Both communities have 4 different species, so they have same richness.
2. Community B is more even, because each species has the same abundance.

Even when two samples have identical richness and evenness, we still may conclude that one is more diverse than the other if the species are very dissimilar in one of the samples (have high phylogenetic distance), but very closely related to each other in the second sample.

Now, you do not need to know what all these different metrics are, but just remember that there is not a single definition of diversity and as always, the metric you choose to use may influence your results.

## Alpha diversity

In order to estimate alpha diversity of the samples, we first generate the rarefaction curves. Recall that rarefaction measures the number of observed OTUs as a function of the subsampling size.

### comment Background: Rarefaction

To estimate the fraction of species sequenced, rarefaction curves are typically used. A rarefaction curve plots the number of species as a function of the number of individuals sampled. The curve usually begins with a steep slope, which at some point begins to flatten as fewer species are being discovered per sample: the gentler the slope, the less contribution of the sampling to the total number of operational taxonomic units or OTUs.

Green, most or all species have been sampled; blue, this habitat has not been exhaustively sampled; red, species rich habitat, only a small fraction has been sampled.

(A Primer on Metagenomics Wooley et al. 2010 )

We calculate rarefaction curves with the Rarefaction.single tool tool:

### hands_on Hands-on: Calculate Rarefaction

• Rarefaction.single tool with the following parameters
• param-file “shared”: the shared file from Make.shared tool

Note that we used the default diversity measure here (sobs; observed species richness), but there are many more options available under the calc parameter. The mothur wiki describes some of these calculators here.

Examine the rarefaction curve output.

numsampled    0.03-F3D0    lci-F3D0    hci-F3D0    0.03-F3D1   ...
1              1.0000       1.0000      1.0000      1.0000
100           41.6560      35.0000     48.0000     45.0560
200           59.0330      51.0000     67.0000     61.5740
300           70.5640      62.0000     79.0000     71.4700
400           78.8320      71.0000     87.0000     78.4730
500           85.3650      77.0000     94.0000     83.9990
...


This file displays the number of OTUs identified per amount of sequences used (numsampled). What we would like to see is the number of additional OTUs identified when adding more sequences reaching a plateau. Then we know we have covered our full diversity. This information would be easier to interpret in the form of a graph. Let’s plot the rarefaction curve for a couple of our sequences:

### hands_on Hands-on: Plot Rarefaction

• Plotting tool - for multiple series and graph types tool with the following parameters
• “Plot Title”: Rarefaction
• “Label for x axis”: Number of Sequences
• “Label for y axis”: Number of OTUs
• “Output File Type”: PNG
• param-repeat Click on Insert Series,
• param-collection “Dataset”: rarefaction curve collection
• “Header in first line?”: Yes
• “Column for x axis”: Column 1
• “Column for y-axis”: Column 2 and Column 5 and every third column until the end (we are skipping the low confidence and high confidence interval columns)

View the rarefaction plot output. From this image can see that the rarefaction curves for all samples have started to level off so we are confident we cover a large part of our sample diversity:

Finally, let’s use the Summary.single tool to generate a summary report. The following step will randomly subsample down to 2389 sequences, repeat this process 1000 times, and report several metrics:

### hands_on Hands-on: Summary.single

• Summary.single tool with the following parameters
• param-file “share”: the shared file from Make.shared tool
• “calc”: nseqs,coverage,sobs,invsimpson
• “size”: 2389

View the summary output from Summary.single tool. This shows several alpha diversity metrics:

• sobs: observed richness (number of OTUs)
• coverage: Good’s coverage index
• invsimpson: Inverse Simpson Index
• nseqs: number of sequences
label   group   sobs          coverage    invsimpson   invsimpson_lci   invsimpson_hci  nseqs
0.03    F3D0    167.000000    0.994697    25.686387    24.648040        26.816067       6223.000000
0.03    F3D1    145.000000    0.994030    34.598470    33.062155        36.284520       4690.000000
0.03    F3D141  154.000000    0.991060    19.571632    18.839994        20.362390       4698.000000
0.03    F3D142  141.000000    0.978367    17.029921    16.196090        17.954269       2450.000000
0.03    F3D143  135.000000    0.980738    18.643635    17.593785        19.826728       2440.000000
0.03    F3D144  161.000000    0.980841    15.296728    14.669208        15.980336       3497.000000
0.03    F3D145  169.000000    0.991222    14.927279    14.494740        15.386427       5582.000000
0.03    F3D146  161.000000    0.989167    22.266620    21.201364        23.444586       3877.000000
0.03    F3D147  210.000000    0.995645    15.894802    15.535594        16.271013       12628.000000
0.03    F3D148  176.000000    0.995725    17.788205    17.303206        18.301177       9590.000000
0.03    F3D149  194.000000    0.994957    21.841083    21.280343        22.432174       10114.000000
0.03    F3D150  164.000000    0.989446    23.553161    22.462533        24.755101       4169.000000
0.03    F3D2    179.000000    0.998162    15.186238    14.703161        15.702137       15774.000000
0.03    F3D3    127.000000    0.994167    14.730640    14.180453        15.325243       5315.000000
0.03    F3D5    138.000000    0.990523    29.415378    28.004777        30.975621       3482.000000
0.03    F3D6    155.000000    0.995339    17.732145    17.056822        18.463148       6437.000000
0.03    F3D7    126.000000    0.991916    13.343631    12.831289        13.898588       4082.000000
0.03    F3D8    158.000000    0.992536    23.063894    21.843396        24.428855       4287.000000
0.03    F3D9    162.000000    0.994803    24.120541    23.105499        25.228865       5773.000000


There are a couple of things to note here:

• The differences in diversity and richness between early and late time points is small.
• All sample coverage is above 97%.

There are many more diversity metrics, and for more information about the different calculators available in mothur, see the mothur wiki page

We could perform additional statistical tests (e.g. ANOVA) to confirm our feeling that there is no significant difference based on sex or early vs. late, but this is beyond the scope of this tutorial.

## Beta diversity

Beta diversity is a measure of the similarity of the membership and structure found between different samples. The default calculator in the following section is thetaYC, which is the Yue & Clayton theta similarity coefficient. We will also calculate the Jaccard index (termed jclass in mothur).

We calculate this with the Dist.shared tool, which will rarefy our data.

### hands_on Hands-on: Beta diversity

1. Dist.shared tool with the following parameters
• param-file “shared”: to the shared file from Make.shared tool
• “calc”: thetayc,jclass
• “subsample”: 2389

Let’s visualize our data in a Heatmap:

2. Heatmap.sim tool with the following parameters
• “Generate Heatmap for”: phylip
• param-collection “phylip”: the output of Dist.shared tool (this is a collection input)

Look at some of the resulting heatmaps (you may have to download the SVG images first). In all of these heatmaps the red colors indicate communities that are more similar than those with black colors.

For example this is the heatmap for the thetayc calculator (output thetayc.0.03.lt.ave):

and the jclass calulator (output jclass.0.03.lt.ave):

When generating Venn diagrams we are limited by the number of samples that we can analyze simultaneously. Let’s take a look at the Venn diagrams for the first 4 time points of female 3 using the Venn tool:

### hands_on Hands-on: Venn diagram

• Venn tool with the following parameters
• param-collection “OTU Shared”: output from Sub.sample tool (collection)
• “groups”: F3D0,F3D1,F3D2,F3D3

This generates a 4-way Venn diagram and a table listing the shared OTUs.

Examine the Venn diagram:

This shows that there were a total of 180 OTUs observed between the 4 time points. Only 76 of those OTUs were shared by all four time points. We could look deeper at the shared file to see whether those OTUs were numerically rare or just had a low incidence.

Next, let’s generate a dendrogram to describe the similarity of the samples to each other. We will generate a dendrogram using the jclass and thetayc calculators within the Tree.shared tool:

### hands_on Tree

1. Tree.shared tool with the following parameters
• “Select input format”: Phylip Distance Matrix
• param-collection “phylip”: the distance files output from Dist.shared tool
2. Newick display tool with the following parameters
• param-collection “Newick file”: output from Tree.shared tool

Inspection of the the tree shows that the early and late communities cluster with themselves to the exclusion of the others.

thetayc.0.03.lt.ave:

jclass.0.03.lt.ave:

# Visualisations

## Krona

A tool we can use to visualize the composition of our community, is Krona

### hands_on Hands-on: Krona

First we convert our mothur taxonomy file to a format compatible with Krona

1. Taxonomy-to-Krona tool with the following parameters
• param-collection “Taxonomy file”: the taxonomy output from Classify.otu
2. Krona pie chart tool with the following parameters
• “Type of input”: Tabular
• param-collection “Input file”: the taxonomy output from Taxonomy-to-Krona tool

The resulting file is an HTML file containing an interactive visualization. For instance try double-clicking the innermost ring labeled “Bacteroidetes” below:

### question Question

What percentage of your sample was labelled Lactobacillus?

### solution Solution

Explore the Krona plot, double click on Firmicutes, here you should see Lactobacillus clearly (16% in our case), click on this segment and the right-hand side will show you the percentages at any point in the hierarchy (here 5% of all)

### Exercise: generating per-sample Krona plots (Optional)

You may have noticed that this plot shows the results for all samples together. In many cases however, you would like to be able to compare results for different samples.

In order to save computation time, mothur pools all reads into a single file, and uses the count table file to keep track of which samples the reads came from. However, Krona does not understand the mothur count table format, so we cannot use that to supply information about the groups. But luckily we can get Classify.otu tool to output per-sample taxonomy files. In the following exercise, we will create a Krona plot with per-sample subplots.

### question Exercise: per-sample plots

Try to create per-sample Krona plots. An few hints are given below, and the full answer is given in the solution box.

1. Re-run galaxy-refresh the Classify.otu tool tool we ran earlier
• See if you can find a parameter to output a taxonomy file per sample (group)
2. Run Taxonomy-to-Krona tool again on the per-sample taxonomy files (collection)
3. Run Krona tool

### solution Full Solution

1. Find the previous run of Classify.otu tool in your history
• Hit the rerun button galaxy-refresh to load the parameters you used before:
• param-file “list”: the list output from Cluster.split tool
• param-file “count”: the count table from Remove.groups tool
• param-file “taxonomy”: the taxonomy output from Remove.groups tool
• “label”: 0.03
• “persample - allows you to find a consensus taxonomy for each group”: Yes

You should now have a collection with per-sample files

2. Taxonomy-to-Krona tool with the following parameters
• param-collection “Taxonomy file”: the taxonomy collection from Classify.otu tool
3. Krona pie chart tool with the following parameters
• “Type of input”: Tabular
• param-collection “Input file”: the collection from Taxonomy-to-Krona tool
• “Combine data from multiple datasets?”: No

The final result should look something like this (switch between samples via the list on the left):

## Phinch

We may now wish to further visualize our results. We can convert our shared file to the more widely used biom format and view it in a platform like Phinch.

### hands_on Hands-on: Phinch

1. Make.biom tool with the following parameters
• param-collection “shared”: the output from Sub.sample tool
• param-collection “constaxonomy”: the taxonomy output from Classify.otu tool
• param-file “metadata”: the mouse.dpw.metadata file you uploaded at the start of this tutorial
2. View the file in Phinch
• If you expand the the output biom dataset, you will see a link to view the file at Phinch

• Click on this link (“view biom at Phinch”)

This link will lead you to a Phinch server (hosted by Galaxy), which will automatically load your file, and where you can several interactive visualisations:

If this visualisation link is not present on your Galaxy dataset, you can download the generated BIOM file from Galaxy, and upload it directly to the Phinch server at https://usegalaxy.eu/phinch/.

Important: After downloading, please change the file extension from .biom1 to .biom before uploading to Phinch.

Note: This link will visualize your data in Phinch version 1. Recently, Phinch have released version 2 as a desktop application. This file can also be visualized in Phinch2, but requires installation of Phinch to your local machine

# Conclusion

Well done! trophy You have completed the basics of the Schloss lab’s Standard Operating Procedure for Illumina MiSeq data. You have worked your way through the following pipeline:

### keypoints Key points

• 16S rRNA gene sequencing analysis results depend on the many algorithms used and their settings

• Quality control and cleaning of your data is a crucial step in order to obtain optimal results

• We can explore alpha and beta diversities using Krona and Phinch for dynamic visualizations

# Useful literature

Further information, including links to documentation and original publications, regarding the tools, analysis techniques and the interpretation of results described in this tutorial can be found here.

# References

1. DeSantis, T. Z., P. Hugenholtz, N. Larsen, M. Rojas, E. L. Brodie et al., 2006 Greengenes, a Chimera-Checked 16S rRNA Gene Database and Workbench Compatible with ARB. Applied and Environmental Microbiology 72: 5069–5072. 10.1128/aem.03006-05
2. Liu, Z., T. Z. DeSantis, G. L. Andersen, and R. Knight, 2008 Accurate taxonomy assignments from 16S rRNA sequences produced by highly parallel pyrosequencers. Nucleic Acids Research 36: e120–e120. 10.1093/nar/gkn491
3. Schloss, P. D., S. L. Westcott, T. Ryabin, J. R. Hall, M. Hartmann et al., 2009 Introducing mothur: Open-Source, Platform-Independent, Community-Supported Software for Describing and Comparing Microbial Communities. Applied and Environmental Microbiology 75: 7537–7541. 10.1128/aem.01541-09
4. Wooley, J. C., A. Godzik, and I. Friedberg, 2010 A Primer on Metagenomics (P. E. Bourne, Ed.). PLoS Computational Biology 6: e1000667. 10.1371/journal.pcbi.1000667
5. Federhen, S., 2011 The NCBI Taxonomy database. Nucleic Acids Research 40: D136–D143. 10.1093/nar/gkr1178
6. Bonilla-Rosso, G., L. E. Eguiarte, D. Romero, M. Travisano, and V. Souza, 2012 Understanding microbial community diversity metrics derived from metagenomes: performance evaluation using simulated data sets. FEMS Microbiology Ecology 82: 37–49. 10.1111/j.1574-6941.2012.01405.x
7. Schloss, P. D., 2012 Secondary structure improves OTU assignments of 16S rRNA gene sequences. The ISME Journal 7: 457–460. 10.1038/ismej.2012.102
8. Quast, C., E. Pruesse, P. Yilmaz, J. Gerken, T. Schweer et al., 2012 The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research 41: D590–D596. 10.1093/nar/gks1219
9. Cole, J. R., Q. Wang, J. A. Fish, B. Chai, D. M. McGarrell et al., 2013 Ribosomal Database Project: data and tools for high throughput rRNA analysis. Nucleic Acids Research 42: D633–D642. 10.1093/nar/gkt1244
10. Fouhy, F., A. G. Clooney, C. Stanton, M. J. Claesson, and P. D. Cotter, 2016 16S rRNA gene sequencing of mock microbial populations- impact of DNA extraction method, primer choice and sequencing platform. BMC Microbiology 16: 10.1186/s12866-016-0738-z
11. Singer, E., B. Andreopoulos, R. M. Bowers, J. Lee, S. Deshpande et al., 2016 Next generation sequencing data of a defined microbial mock community. Scientific Data 3: 160081. 10.1038/sdata.2016.81
12. Rognes, T., T. Flouri, B. Nichols, C. Quince, and F. Mahé, 2016 VSEARCH: a versatile open source tool for metagenomics. PeerJ 4: e2584. 10.7717/peerj.2584
13. Finotello, F., E. Mastrorilli, and B. D. Camillo, 2016 Measuring the diversity of the human microbiota with targeted next-generation sequencing. Briefings in Bioinformatics bbw119. 10.1093/bib/bbw119
14. Balvočiūtė, M., and D. H. Huson, 2017 SILVA, RDP, Greengenes, NCBI and OTT — how do these taxonomies compare? BMC Genomics 18: 10.1186/s12864-017-3501-4

# Feedback

Did you use this material as an instructor? Feel free to give us feedback on how it went.

# Citing this Tutorial

1. Saskia Hiltemann, Bérénice Batut, Dave Clements, 2020 16S Microbial Analysis with mothur (extended) (Galaxy Training Materials). /archive/2020-12-01/topics/metagenomics/tutorials/mothur-miseq-sop/tutorial.html Online; accessed TODAY
2. Batut et al., 2018 Community-Driven Data Analysis Training for Biology Cell Systems 10.1016/j.cels.2018.05.012

### details BibTeX

@misc{metagenomics-mothur-miseq-sop,
author = "Saskia Hiltemann and Bérénice Batut and Dave Clements",
title = "16S Microbial Analysis with mothur (extended) (Galaxy Training Materials)",
year = "2020",
month = "12",
day = "01"
url = "\url{/archive/2020-12-01/topics/metagenomics/tutorials/mothur-miseq-sop/tutorial.html}",
note = "[Online; accessed TODAY]"
}
@article{Batut_2018,
doi = {10.1016/j.cels.2018.05.012},
url = {https://doi.org/10.1016%2Fj.cels.2018.05.012},
year = 2018,
month = {jun},
publisher = {Elsevier {BV}},
volume = {6},
number = {6},
pages = {752--758.e1},
author = {B{\'{e}}r{\'{e}}nice Batut and Saskia Hiltemann and Andrea Bagnacani and Dannon Baker and Vivek Bhardwaj and Clemens Blank and Anthony Bretaudeau and Loraine Brillet-Gu{\'{e}}guen and Martin {\v{C}}ech and John Chilton and Dave Clements and Olivia Doppelt-Azeroual and Anika Erxleben and Mallory Ann Freeberg and Simon Gladman and Youri Hoogstrate and Hans-Rudolf Hotz and Torsten Houwaart and Pratik Jagtap and Delphine Larivi{\{e}}re and Gildas Le Corguill{\'{e}} and Thomas Manke and Fabien Mareuil and Fidel Ram{\'{\i}}rez and Devon Ryan and Florian Christoph Sigloch and Nicola Soranzo and Joachim Wolff and Pavankumar Videm and Markus Wolfien and Aisanjiang Wubuli and Dilmurat Yusuf and James Taylor and Rolf Backofen and Anton Nekrutenko and Björn Grüning},
title = {Community-Driven Data Analysis Training for Biology},
journal = {Cell Systems}
}
`